PCMtuner-tool

 If OBDSTAR ECU Master programmer fails to read the ECU, TCU, or BCM, or has other faults, you can upload the log data for OBDSTAR engineers to analyze. Uploading log data is simple — just follow these steps. Go to Support section. Choose Log Upload function. Hit U pload and select the log data you need to report to OBDSTAR.

  Autotuner Mercedes W213 ECU chip tuning review from a professional tuners: Vehicle 2017 Mercedes-Benz E220d AMG Line 2.0 CDI OM654 9G-Tronic Automatic 194 BHP Bosch MD1CP001 (SPC5777M) This is Mercedes’ Bosch MD1CP001, built around the SPC5777M TriCore processor. One of the most heavily protected ECUs fitted to the W213 E-Class, designed specifically to prevent unauthorised calibration changes. Until recently, if you wanted to modify one of these, it meant removing the ECU, opening it, wiring directly to the PCB and carrying out a full boot operation. He took it a step further. This 2017 Mercedes-Benz E220d AMG Line 9G-Tronic arrived requiring multiple software solutions after repeated DPF regeneration issues. Rather than replacing expensive emissions components that had already reached the end of their service life, the owner opted for a complete software calibration package designed around reliability and economy. But before any calibration could even begin...

 Good new! FormulaFlash ECU programmer IMMO OFF module is now available in User Center directly. How to use IMMO OFF function in the User Center? In User Center, go to Data Processing tab. Select IMMO OFF. Select an existing device serial number and upload the data file to be processed. Click the "Analyze File" button and wait for the system t return the immo information. Click "Execute Close". After the processing is completed, the system will return the corresponding successfully processed data fi;e. Write the modified file back to ECU using FormulaFlash.

 Magic Motorsport Flex ecu programmer released Bosch MDG1 boot glitch unlocking function — a process that involves removing a resistor, performing the glitch through a dedicated pin, and then refitting the resistor. Once completed, the ECU becomes "benchable," much like a pre-June 2020 unit. However, one question kept surfacing: If my ECU is glitch-unlocked with Flex, can I then use my AutoTuner or Kess3 to read and write it on the bench? The Setup: A Glitch-Unlocked MD1CS003 We started with the same 2025 Bosch MD1CS003 ECU that had been successfully unlocked using the Flex boot glitch protocol. The ECU was now fully unlocked and ready for bench operations — at least with the Flex tool. Our goal was simple: wire it up to both an AutoTuner and a Kess3 using standard bench connections (as if it were a pre-June 2020 ECU) and see if either tool would recognize it as unlocked and allow read/write operations. Test 1: AutoTuner We connected the ECU using the standar...

  Another VAG powerhouse joins the No RFT family. Magic Motorsport Flex version 8.4.0.0 introduces support to VAG Bosch MD1CS014 TC299 control units, that can now be managed directly inside your workshop through the Boot Glitch mode. No shipping, no RFT service. Boot Glitch mode allows you to unlock and program independently, reducing working time and leaving you full control over the operations. No shipping. No Remote Force Team. Just Flex. Using Boot Glitch Mode, you gain complete control over the entire operation — from unlock to programming — while reducing turnaround times and keeping every job in-house. Bosch MD1CS014 TC299 support Boot Glitch Unlock Bench Programming Faster workflow and total autonomy Available now for Flex Full Master (FLS0.5M) and Flex Full Slave (FLS0.5S) users. One more ECU. One less reason to ship. Key Insights: Working Mode: Boot Glitch — Bench Memories : Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Full Backu...

  Magic Motorsport Flex read and write Peugeot 3008 year 2021 Bosch MD1CS003 ECU successfully. Unlock MD1CS003 locked ECU boot glitch mode. Solder wires to the E-port directly without using the FLX 4.1 cable. Then read and write ECU on bench after unlocking. Works fine. Car starts without problem. Images attached:

 Bosch EDC16U ECU Cloning with FormulaFlash programmer successfully Read eeprom & flash data from the original ECU on bench mode. Connect a donor ECU with Formula Flash, back up data for the donor ECU. Then write original data to the donor ECU. ECU cloning is done on bench mode. Checksum correction by Formulaflash.