Posts

Showing posts with the label Fetrotech Tool

Fetrotech Tool Error Key Solution

Image
  Problem: Hi. Fetrotech tool has Error key. What is the problem? Follow all step by step to install the new Fetrotech software. Key install already. Any solution? Solution: The error key was caused by the wrong activation key input. Double-check if the key file inputted is correct, then replace the file again. Copy and paste FEkey.txt file to desktop. DON'T CHANGE ITS NAME. Open FEkey.ext input the SN on your device's backside (uppercase letter), and save it. Don't change the file name, don't change anything, don't use space. Don't delete the FEkey.txt file, otherwise, the software will refuse to open. Check Fetrotech software new installation guide http://www.pcmtuner.org/free-download-fetrotech-tool-patch/ www.iecutool.com

Fetrotech PSA MD1CS003 Car Not Start?

Image
  Problem: Today i read and wrote md1cs003 adblue off using fetrotech tool . cheksum with fetrotech Car started 3 times and then it wouldn't start And dtc ecu P3028 What To do? Solution: TPROT off needed for PSA MD1CS003. Make Tprot off. How to do tprot on this ECU? At the address: 0x2A5D40 2D 0F 00 00 0C C2 → TPROT ON 2D 0F 00 00 82 4F → TPROT OFF if it doesn't work, rewrite original eeprom/flash for the car to start. Read also: http://www.pcmtuner.org/fetrotech-read-and-write-psa-md1cs003/ FoxFlash Read and Write PSA MD1CS003 with Tprot

Fetrotech Black Read and Write MED9.1 MPC562

Image
  Fetrotech Black standalone read and write Med9.1 MPC562. Read very fast. I've tried on two ecu and everything is fast. read fast and pinout is good. Checksum its ok for that ecu. Wrote succeed. check bench pinout in tuner-box.com Read and write no problem.

How to Use Fetrotech ECU Extractor to Open ECU Cover?

Image
  What's Fetrotech SEIKOTOOL ECU Extractor ? Fetrotech seikotool ECU cover extractor is designed for ECU worker and chiptuner. It helps to remove/ install car ECU module cover easily. Fetrotech seikotool ECU cover extractor is a useful tool for opening the ECU. Fetrotech seikotool ECU cover extractor works perfectly with ECU tunning tools MPM , Fetrotech , PCMTuner , Foxflash , Autotuner, Kess v2, Kess v3, Dfox, Bitbox and much more. We need to use four or six at a time based on the type of ECU. Fetrotech seikotool ECU cover extractor must be fixed in the place where the screws on the control unit are unscrewed to allow the user to remove the cover without damaging or deforming it. It is a nice tool that every tuners should have. What's the advantages of Fetrotech vs other ECU openers? 1). Fetrotech ECU remover is solid made, not easy to break. 2). Fetrotech ecu extractor is easy to use How to Use Fetrotech ECU remover to Open ECU Cover? Step one: Unscrew t...

Fetrotech Tool BMW E90 Edc16c35 DPF off

Image
  Fetrotech tool silver read and write BMW E90 EDC16C35 successfully, Dpf off. Checksum ok, very fast read / write. The fetrotech silver works separately from pcmtuner. I made a change like this .

Fetrotech Tool VW EDC16U1 Immo Off

Image
Vag can pro unbricking edc16u1. Fetrotech tool eeprom immo off and stage 1 + egr tva off read write some ECU yes, some no, vag can pro need service files, and then you play. now for that you need to have one of the online services to be able to download certain or be patient and search online.

Fetrotech Tool MED9.5.10 S1 and S2 Error Solution

Image
 Problem: My Fetrotech tool black does not read med9.5.10 ecu. It says s1 and s2 pinout error. Any solution? with this pinout Solution The pinout is correct. But try connect extra power+gnd+canbus like this (also s1 s2)

Fetrotech Tool Read and Write BMW EDC16C35 OK

Image
  Fetrotech tool silver with pcmtuner read and write Mini/BMW/PSA 1.6HDI Bosch EDC16c35 ECU no problem. Car starts without problem. Fetrotech pinout to EDC16C35 Read and write ok

Fetrotech Tool EDC16U31 S1 and s2 Pinout Error Solution

Image
  Problem: I need the Fetrotech tool pinout for EDC16U31, I tried to use the pinout from Tuner box but the error is S1 and s2 pinout error. Solution: Use the first wiring diagram. Fetrotech read ok. Try swapping GPT's, others have reported connecting the CANL and CANH also can make it read.

Possible to Make Fetrotech Tool Silver Work Alone?

Image
 The Fetrotech tool silver works with pcmtuner because PCMtuner has a bridge at this point. It works on the same software, the difference is in the bridge. One of our customer took both black and silver board and found the difference. if you want your silver fetrotech to work alone. then do a little modification. that is the difference between black and silver. much more comfortable work. User feedback: I did it and it's work, made a bridge in silver fetrotech PCB and now work standalone. works perfectly, I tested on edc17cp14. You are at your own risk.

Fetrotech Tool Read and Write PSA EDC17C60 Manual TPROT OFF

Image
 Read and write EDC17C60 PSA with fetrotech tool black successfully, DFP+EGR+ TPROT OFF. tprot off manually same as with pcmtuner. reading/writing with fetrotech, DPF+EGR off by DAVINCI 1. O. 28, TPROT off with WINE. checksum with wimols, fetrotech also does it

Fetrotech Tool Read and Write PSA MD1CS003 Success

Image
  Fetrotech Tool Silver Feedback from iecutool.com customer: After install, and received licence, reinstall Fetrotech setup again, will work no problem (Windows 7 Ultimate x64) Disable all antivirus and firewall. EDC16C34 — Read/Write OK MD1CS003 — Read/Write OK

Fetrotech Tool Mercedes EDC16CP31 Pinout

Image
 Some users had problems reading Mercedes EDC16CP31 ECU with fetrotech tool . Tried all listed pinouts on pcm tuner list, no connection. Says s1&s2 pinout error. Users found a few different pinouts for this ECU and none of them worked. Solution: Please see attached for Mercedes-Benz EDC16CP31 on fetrotech. Use this top pinout pay attention to the gpt wiring, as we found the colors on the pinout we used do not match numbers. Opposite to each other. It is working now. Fetrotech tool read and write no problem See also: http://www.pcmtuner.org/fetrotech-tool-mercedes-edc16c2-pinout/

Fetrotech Tool Failed to Read Citroen 2020 Md1cs003?

Image
  Q: Fetrotech tool black not possible read Citroen c5 aircross 1.3 puretech Md1cs003 2020year. There is no access to the ECU. Solution: Security change on most MG/MD ECU in 2020 Fetroteh tool cannot read if car sold after july 2020. ecu is locked. After 2020 not all Expensive tools support, in fact BMW/toyota still not possible. Toyota module 74 will work upto 2020, after that UDS security changed.

PCMTuner vs Fetrotech Tool vs MPM ECU Tool

Image
 What's the difference between pcmtuner, fetrotech tool and MPM ecu tuning tool? This is frequently asked by iecutool.com customers. Here's the clue. PCMTuner App PCMTuner App is an application that can control pcmtuner flash, fetrotech, MPM and more feature plugins from pcmtuner team. The appliation provides instructions and wiring diagrams. PCMTuner : PCMtuner is a customized read-write device specially used for vehicle engine control system (ECU) and transmission control system (TCU). PCMTuner flash is based on pcm-flash which comes with 67 modules . The smart USB dongle stores the protocols. The dongle can be purchased alone (to work with ktmbench, openport, SM2 Pro). PCMTuner vs PCMTuner dongle Pcmtuner is a complete hardware device with future expandability linked to the pcmtuner software suite. The dongle allows you to run the pcm flash modules etc PCMtuner flash can read and write ECU via OBD, Bench, Boot, OBDvr modes. Fetrotech Tool: This is an a...