PCMtuner-tool

 How to replace Mercedes-Benz W212 DSM A0002703452 (FBS4) with Launch X431 ECU & TCU programmer on bench? Quick search DSM, choose DSM and Bench mode. Check wiring diagram. Connect DSM FBS4 with Launch X431 ECU programmer according to the diagram. Read module information Read EEPROM data Read and save original data. After reading data, exit directly and replace the donor Gearbox that needs to be replaced. Connect the donor Gearbox with Launch X431 ECU programmer . Read module information and read eeprom for the donor gearbox to back up data. Select Personalization. Upload the original gearbox eeprom data and personalize data. Persianization successful. New gearbox needs to be programmed to start. Use MB star device for programming and coding. www.iecutool.eu

 How-to: clone GM Buick 6T30 transmission gearbox TCU with Launch X431 ECU & TCU programmer on bench. Quick search 6T30 and select Buick Encore 2013–2019 6T30 gearbox TCU. Choose bench mode. Check wiring diagram. Connect 6T30 Gearbox TCU with Launch x431 ecu & tcu programmer Connect TCU. Back up FLASH data of the original TCU. Disconnect the original TCU. Connect a donor TCU with launch x431 ecu programmer . Back up flash data of the donor 6T30 TCM. Write flash data to the donor TCM. Clone 6T30 gearbox successfully. Now install the gearbox back to vehicle. www.iecutool.eu

 Cloned GM ACDelco E80 ECM using Launch X431 ECU & TCU programmer successfully. Quick search "E80" and select model/year. For example, its an E80 out of a Buick Cascada 2016. Check bench wiring diagram Connect Launch X431 ECU programmer with E80 ECM following the wiring diagram Connect ECM and read FLASH data. Save flash data. Disconnect original ECM. Connect a donor ECM with Launch x431 ecu programmer following the same wiring. Back up donor ECM data. Then Write original flash data to the donor ECM. Write original flash data to the donor ECM successfully. Press Disconnect. ECM cloning is completed. Done. www.iecutool.eu

 Tutorial: How to clone Hyundai/Kia MEG17.9.12 ECU with Launch X431 ECU TCU Programmer on bench successfully. Quick search MEG17.9.12 ECU Select Kia Ceed 2013–2016 MEG17.9.12 TCU ST10F275 Check wiring diagram Connect Launch X431 ecu programmer with ECU follow the wiring diagram Read original ECU information Then read and save complete data (Full data). Disconnect original ECU. Connect a donor ECU with Launch X431 ECU programmer using the same wiring diagram. Always back up donor ECU information in case anything goes wrong. Then Write complete data (full data) Upload full data read in step 1. Write full data succesfsully. Clonine ECU is completed. Don’t forget to press Disconnect. Now install the donor ECU to vehicle. www.iecutool.eu