PCMtuner-tool

  PCMTuner read and write Ford Escape 2017 1.5T EMS2510 ECU successfully. Module 32 obd Read 25 minutes Write 3 minutes Everything went fine. I used pcmtuner with godiag and bench supply. Related Posts

 Here comes the pcmtuner pinout for Hyundai/Kia Dephi MT38 module 52 BSL. Pinout: A27 — K-Line A40 — +12v, A41 — CAN Hi A42 — CAN Lo B12 -12v B39 — ground B76 — +12v Finally make 12+ to A24 to enter bsl mode. www.iecutool.com

 Tutorial: use PCMTuner and the new Godiag GPT Boot Adapter to read VW EDC17CP14 ECU. First, we connect the godiag adapter to the ecu via pcmflash pinout diagram. Make sure godiag is set to Auto. Connect 12V to 13v power supply to the godiag. Don't connect power to the pcmtuner. Insert pcmtuner dongle to PC. Run pcmflash 1.2.0. Select protocol 71 Identify ECU Read ECU until finished. www.iecutool.com  

  Problem: My pcmtuner device can no longer be recognized by my laptop (unknown device), no driver loaded. I want to enter it manually. What's the driver menu path? Solution: Disable antivirus and windows defender and then reinstall. antivirus will block part of driver in system. Download pcmtuner driver here. Free Download PCMTuner scanmatik driver If still cannot see device, try new usb cable or test on another pc. www.iecutool.com

PCMTuner new test report from Mr. Katzmarek: KTM 790 Duke 2023 Model Bosch ME 17.9.21.1 read and write successfully with pcmtuner module 71 . Using this pinout

 PCMTuner dongle (pcmflash 1.2.0) will read Gen2 Mazda3 (2010+) ECU via OBD module 9. If already remove ECU from car, it can be read via OBD on bench mode using Godiag adapters. Tools used: Scanmatik pro2 PCMTuner dongle Godiag GT100+ breakout box Godiag ECU Boot GPT adapter (the adapter can be used with pcmflash + j2534 device to read ECUs in boot, bench or GPT mode) Connect SM2 Pro with laptop and gt100 Connect godiag ECU adapter with gt100 Connect godiag ECU adapter with ECU via jumper cables following the wiring diagram Connect 12v powre supply to gt100 Plug pmctuner dongle to laptop Press the MNL button on the godiag ECU adapter Run pcmflash software (DON'T UPDATE SOFTWARE ONLINE) Select procotol Read ECU Read ECU completely. Save data. www.iecutool.com

 Will pcmtuner read and write this Mitsubishi Lancer ECU? Solution: pcmtuner (pcmflash) module 31 cannot read/write this ECU. 2 Ways to read this ecu with pcmtuner or dongle: 1.use scanmatik or openport 2.0 +pcmtuner standalone usb dongle 2.If need to read and write with pcmtuner, you must have powerbox. or use ktag or foxflash to read and write this ECU.

 User feedback: pcmtuner module 42 read Isuzu 4hk1-tc Denso SH7059 engine ECU successfully with godiag tricore cable on bench. Follow the pinout here Read also: http://www.pcmtuner.org/read-isuzu-denso-sh7055-ecu-with-pcmtuner/

  PCMTuner read and write PSA Peugeot 2008 2015 edc17c10 ecu successfully. Read Dpf egr off Write Ok Pinout is in the instruction Read and write ok with bench module 71

 VAG simos 8.32 pcmtuner Reading unsuccessful via OBD. Says not readable. What tools to read? PCMTuner cannot read this ECU. Flex will read it via VR. CMD read it on bench (unlock). Or try to OBD read with foxflash . It will read if there is a virtual file on service. Need luk. Some also say Foxflash can read it by BSL. Need to test by your side. www.iecutool.com

  Question: Can pcmtuner read this Delphi CRD 11 ECU from Mercedes. or other tools? PCMTuner will not read crd11. Ktag will read and write via BDM. ECU — Ktag 3–6 2–1 4–5 6–10 8–7 10–8 And make 2 Bridge. Ktag Protokoll 119 Ecu Delphi DCM3.2 CRD.11 Foxflash/KT200 will read it via OBD or Jtag. Foxflah pinout to Delphi CRD 11 1). Kit to use for connection with JTAG flat cable: – Multifunction cable – Flat color cable Connect multifunction cable as follows: Solder the rainbow flat cable as in the photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x 3). Kit to use for connection with BDM adapter: – Multifunction cable – Delphi adapter – Grey flat cable – Connectors dip/sip Connect multifunction cable as follows: Do a link as in photo: Solder the dip/sip connectors on the pcb: Insert Delphi adapter in REVERSE as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x www.iecut...