PCMtuner-tool

 The Renault Kwid ECU ME17.9.23 TC1724 was brought in for cloning. The part number on the ECU is 0 261 S17 723. The goal was to read the ECU data using the OBDSTAR ECU Maste r, back it up, and then write the data back to verify the process works. Bench Mode Connections All necessary connections were made for bench mode operation. The wiring includes: Positive and negative power connections CAN High and Low wires for ignition GPT wire (on the other side) These connections are shown clearly so viewers can follow along. Setting Up the OBDSTAR ECU Master Once in the laptop interface, the ECU Master tool is opened. The vehicle selection is: Navigate to 17.9.23. Select Renault — the ECU profile loads. Select Bench mode. The pinout diagram appears. The ECU is identified — this is the ME17.9.23 TC1724 with part number 179 23. Starting Bench Mode Communication After confirming the pinout, the tool is started in Bench Mode. The device begins connecting to the serv...

 Read and write Lexus RX350 2023 Gen4 Denso ECU with OBDSTAR ECU Master successfully. Lexus RX350- 2023 Gen4 — R7F7 Flash Read ok Write ok Bench mode using PC software. Checksum calculation OK!

 If OBDSTAR ECU Master programmer fails to read the ECU, TCU, or BCM, or has other faults, you can upload the log data for OBDSTAR engineers to analyze. Uploading log data is simple — just follow these steps. Go to Support section. Choose Log Upload function. Hit U pload and select the log data you need to report to OBDSTAR.

  OBDSTAR ECU Master PC ECU flasher works great on Mercedes-Benz Continental PLD MRA7 ECU. It’s great to see it works on this ECU. ECU type: MB Continental PLD (MRA7) XC2287+95640 Bench mode. Use ECU Master configuration C with truck HD PC software. Read ext eeprom ok Read flash ok Write eeprom and flash ok. Checksum correction by ECU Master. Unlock ECU ok. www.iecutool.eu