Flex V8.16.0.0 Add MG1CA920 SPC58N Boot Unlock Using Korhex

 With Magic Motorsport Flex version 8.16.0.0, Korhex extends support to new-generation SPC58N microprocessors.

New support for Bosch MG1CA920 on Rotax engines.

Flex version 8.16.0.0 is now available

With the latest Flex update, Korhex extends support to new-generation SPC58N microprocessors.

The Bosch MG1CA920 control unit from the BRP Group, used on Rotax engines, is now supported with a new dedicated procedure.

Thanks to Flex + Korhex, connection is simpler and more direct: there is no longer any need to remove the resistor on the PCB or manually solder the Boot point.

Fewer steps. More autonomy in the workshop.

Order Korhex and manage the unlocking of supported control units in complete autonomy.

If you are a Flex Full customer, the license is already included in your subscription.

Position Korhex, follow the Flex-guided procedure, and access the SPC58N microprocessor.

Order Korhex, connect it to Flex, and manage the unlocking procedure in complete autonomy.

To access the protocol, you need either the FLS0.20 license or the Flex Full FLS0.5 configuration.

Key Insights:

  • BRP Bosch MG1CA920 SPC58N
  • Working Mode: Boot Glitch
  • Memories: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Full Backup
  • Licenses: FLS0.20M/S — FLS0.5M/S
  • Connect/Glitch Time: ~ 40 seconds
  • Reading Time: ~ 2 minutes
  • Writing Time: ~ 2 minutes

Some of the supported vehicles:

  • Can-Am Maverick Turbo RR (II) (2022MY) 0.9L Rotax 12v 197HP
  • Sea-Doo Switch Sport (I) (2022MY) 1.6L Rotax 1630 ACE 12v 168HP
  • Ski-Doo Expedition (IV) (2024MY) 0.9L Rotax 900 ACE Turbo R 12v 177HP

Flex Update MG1CA920 SPC58N Boot Unlocking with Korhex

Comments

Post a Comment

Popular posts from this blog

PCMTuner PCMFlash Module 42 Denso Bootloader Pinouts

Image
 Here come the PCMTuner PCMflash Module 42 Denso SH705x Bootloader pinouts by pcmtuner Marty. Module 42 ECU List: DIESEL CARS: MAZDA, MITSUBISHI, NISSAN, SUBARU SH705x 3 OPEL 1.7L CDTI SH7058/SH7059 OPEL 1.7L HYBRID SH7055 DIESEL TRUCKS SH7055/SH7058 DIESEL TRUCKS SH7058 ISUZU NPR (NQR) 5.2L DIESEL SH7058/SH7059 MAZDA PETROL SH7055/SH7058 SUBARU 22611-AG57X SH7055 SUBARU METAL CASE SH7055/SH7058 SUBARU PLASTIC CASE SH7058(S) SUBARU STELLA 2008 SH7058S SUBARU TCU SH7055/SH7058 SUZUKI JIMNY, LIANA SH7055 SUZUKI SH7055/SH7058 VOLVO 2.4L SH7058 JAGUAR X 2001–2008, S/XJ/XK 2003–2006 SH7055 DIESEL CARS: MAZDA, MITSUBISHI, NISSAN, SUBARU OPEL 1.7L CDTI SH7058/SH7059 OPEL 1.7L HYBRID SH7055 DIESEL TRUCKS SH7055/SH7058 DIESEL TRUCKS SH7058 ISUZU NPR (NQR) 5.2L DIESEL SH7058/SH7059 MAZDA PETROL SH7055/SH7058 SUBARU 22611-AG57X SH7055 SUBARU METAL CASE SH7055/SH7058 SUBARU PLASTIC CASE SH7058(S) SUBARU STELLA 2008 SH7058S SUBARU TCU SH7055/SH7058 SUZUKI J...
Read more

Foxflash Pinout to Mercedes SIEMENS VDO MSM2.0

Image
  Foxflash programmer will read and write Mercedes Benz gasoline SIEMENS VDO MSM2.0 ECU on bench. Here is the fox flash pinout to MSM 2.0. Select driver Mercedes Siemens ECUS 1.4/1.6 Siemends VDO MSM 2.0 FULL SYSTEM If old and new ecu have read flash and eeprom without problem. Write not work with foxflash. Have error. Cannot write any file as shown image below: After read flash/eprom — Disconnect ecu and restart software (unplug foxflash ) — restart Then connect again, Write flash, Also try lower power only need 13v on this ecu.
Read more