PCMTuner PCMFlash Module 42 Denso Bootloader Pinouts

 Here come the PCMTuner PCMflash Module 42 Denso SH705x Bootloader pinouts by pcmtuner Marty.

Module 42 ECU List:

DIESEL CARS: MAZDA, MITSUBISHI, NISSAN, SUBARU SH705x 3
OPEL 1.7L CDTI SH7058/SH7059
OPEL 1.7L HYBRID SH7055
DIESEL TRUCKS SH7055/SH7058
DIESEL TRUCKS SH7058
ISUZU NPR (NQR) 5.2L DIESEL SH7058/SH7059
MAZDA PETROL SH7055/SH7058
SUBARU 22611-AG57X SH7055
SUBARU METAL CASE SH7055/SH7058
SUBARU PLASTIC CASE SH7058(S)
SUBARU STELLA 2008 SH7058S
SUBARU TCU SH7055/SH7058
SUZUKI JIMNY, LIANA SH7055
SUZUKI SH7055/SH7058
VOLVO 2.4L SH7058
JAGUAR X 2001–2008, S/XJ/XK 2003–2006 SH7055

SH705x Bootloader Denso from PCMtuner module 42

DIESEL CARS: MAZDA, MITSUBISHI, NISSAN, SUBARU

SH705x Bootloader Denso from PCMtuner module 42

OPEL 1.7L CDTI SH7058/SH7059

SH705x Bootloader Denso from PCMtuner module 42

OPEL 1.7L HYBRID SH7055

SH705x Bootloader Denso from PCMtuner module 42

DIESEL TRUCKS SH7055/SH7058

SH705x Bootloader Denso from PCMtuner module 42

DIESEL TRUCKS SH7058

SH705x Bootloader Denso from PCMtuner module 42

ISUZU NPR (NQR) 5.2L DIESEL SH7058/SH7059

SH705x Bootloader Denso from PCMtuner module 42

MAZDA PETROL SH7055/SH7058

SH705x Bootloader Denso from PCMtuner module 42

SUBARU 22611-AG57X SH7055

SH705x Bootloader Denso from PCMtuner module 42

SUBARU METAL CASE SH7055/SH7058

SH705x Bootloader Denso from PCMtuner module 42
SH705x Bootloader Denso from PCMtuner module 42

SUBARU PLASTIC CASE SH7058(S)

SH705x Bootloader Denso from PCMtuner module 42

SUBARU STELLA 2008 SH7058S

SH705x Bootloader Denso from PCMtuner module 42

SUBARU TCU SH7055/SH7058

SH705x Bootloader Denso from PCMtuner module 42

SUZUKI JIMNY, LIANA SH7055

SH705x Bootloader Denso from PCMtuner module 42

SUZUKI SH7055/SH7058

SH705x Bootloader Denso from PCMtuner module 42

VOLVO 2.4L SH7058

SH705x Bootloader Denso from PCMtuner module 42

JAGUAR X 2001–2008, S/XJ/XK 2003–2006 SH7055

Download Pinouts in PDF: PCMTuner Module 42 Denso Bootloader Pinout

Comments

Post a Comment

Popular posts from this blog

FoxFlash Read and Write Volvo Denso MB279700-9xxx

Image
 Foxflash Volvo Denso MB279700–9xxx works perfectly, just follow the steps of foxflash , reading, unlocking, and writing all done on the bench. PROCEDURE: 1 — Read the Ecu AND unlock the Ecu 2 — Write the ECU READING AND UNLOCKING: Connect the following pinout using the multifunction cable. Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit. WRITING: Now it will be possible to reconnect the control unit to the car and write the modified file via OBD. Use the following driver: CAR > VOLVO > Model >2.0 DENSO MB279700 9641 SH72546R CAN Alternatively, you can WRITE also the ECU on the table using the pinout on the next page. Note: Compared to the read pinout, the CAN line is moved. FOXFLASH PINOUT FOR WRITING: Just follow the foxflash instructions: read file 15 min, unlock
Read more

PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

Image
 SIMOS 8.6 requires unlocking in BSL mode by the appropriate module. BSL is usually boot mode for unlock. Same as PCR2.1 . Example: Audi A7 2012 2.8 fsi simos 8.6 unlock, after read/write simos8.6 with pcmtuner successfully. all resistor 1 kom How to work with blocks that require unlocking (PCR2.1, SIMOS8.6): 1) Check the current lock status in the car, if the check is disabled, you can go to read-write, otherwise follow the instructions 2) Remove the unit from the car, open it, transfer the processor to BSL mode using the connection below (PCR2.1, SIMOS8.6), the work as a whole as in the package 53 (you can use tools like powerbox, and you can do without them) SIMOS8.6 Unlock pcmtuner pinout Red — +12, Black — GND, Yellow — CAN-HIGH, Blue — CAN-LOW 3) Choose "SIMOS8.6 (EEPROM/UNLOCK/BSL) or PCR2.1 (EEPROM/UNLOCK/BSL)" depending of ECU type 4) Click Identification — save ECU data somewhere in a text file. 5) Click Read — save the EEPROM 6) Given that EC
Read more

Read/Write BMW MSV70 DME by Foxflash, Ktag or FC200?

Image
 Which tool to read this computer BMW MSV70 DME? Foxflash : Yes, via BDM Jtag Connect multifunction cable as follows: Solder the dip/sip connectors on the pcb and do a link: Insert Siemens/Marelli adapter as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x Ktag / Kess V2 : Need luck. The best option is BDM. Sometimes Kess v2 and ktag clone read ok but failed during writing, checksum error. Ori Kess done well OBD but takes long. Easy to remove and run in bdm. CG FC200: FC200 programmer does not support this computer.
Read more