OBDSTAR DC706 Fails to Read Renault SID321 ECU Fix

 Problem: Trying to read a Renault SID321 ECU using OBDSTAR DC706, but failed. DC706 says the ECU is not supported for the time being. But it is in the car list. Any clue?


OBDSTAR DC706 Renault SID321 Error ECU Not Supported
OBDSTAR DC706 Renault SID321 Error ECU Not Supported

Here is the clue.

The Renault (Continental/Vitesco) SID321 ECU has variations often referred to as "old" and "new" versions.

Older Versions: -2022. Earlier factory software. Often easier / better supported in tools. Generally easier to read/write/clone/

Tool Compatibility Broader (KESS3, AutoTuner, FC200, DC706, Flex etc.)

Newer Versions: 2022–2025+): Updated factory software (more secure, latest maps)

Frequently causes "No Virtual Read" errors in tools even with FLEX. More restrictions; may need updates or bench/boot mode.

DC706 cannot do newer SID321 versions.

Try to use Autotuner. Some users reported Autotuner does more SID321 versions.

Comments

Post a Comment

Popular posts from this blog

Foxflash Pinout to Mercedes SIEMENS VDO MSM2.0

Image
  Foxflash programmer will read and write Mercedes Benz gasoline SIEMENS VDO MSM2.0 ECU on bench. Here is the fox flash pinout to MSM 2.0. Select driver Mercedes Siemens ECUS 1.4/1.6 Siemends VDO MSM 2.0 FULL SYSTEM If old and new ecu have read flash and eeprom without problem. Write not work with foxflash. Have error. Cannot write any file as shown image below: After read flash/eprom — Disconnect ecu and restart software (unplug foxflash ) — restart Then connect again, Write flash, Also try lower power only need 13v on this ecu.
Read more

How to Find Bosch ECU Serial Numbers and Correct Pinouts

Image
 Here is basic post for people asking basic questions, apparently now on high demand since we have gathered again new members in our ECU group . So you got bosch ecu in hand from car and how to figure out how to identify it and what pinout to use? On this case we can randomly take one bosch ecu that we will identify. So all bosch ecus start with serial numbers 028… 026. We just head to bosches page next https://www.bosch-repair-service.com/ Here you search by oe or bosch number, i have random bosch ecu here and it’s 0 281 014 544 and bosch page ends up with a result. We can see its edc16cp35. Now there are two ways. Either to search in foxflash bmw / edc16cp35 for pinout. Or we head to ecu pinout page and figure out pinout from there. One of the best online pinout catalogs can be found at ecu desing, So save webpage https://ecu.design/ecu-pinout/ Copy address and head out there. Type in edc16cp35, bmw uses two processors in this one mpc 562 and mpc564. Pinouts jus...
Read more