Iveco Daily VI DCU17PC42 Added to KESS3 Bench Mode

 Alientech KESS3 released new bench protocol for Bosch DCU17PC42- Iveco Daily VI C70 3.0 FPT.

With the latest KESS3 Truck & Agri activation, you can now work in BENCH mode on the newest generation of commercial vehicles, ensuring complete and reliable control of auxiliary engine functions.

  • Access, read, and write the Bosch DCU17PC42 without opening the unit
  • Manage aftertreatment systems safely and efficiently
  • Deliver precise and professional service on Iveco 3.0 FPT engines

The maintenance and repair of aftertreatment systems are essential to ensure the reliability and long-term durability of work vehicles. For this reason, KESS3 (with an activation dedicated to the heavy-duty and agricultural market) allows you to operate also on Bosch DCUs installed on FPT 3.0 engines, offering complete and safe management of the control units dedicated to the auxiliary engine functions.

With this update, you can operate in BENCH mode, without opening the Bosch DCU17PC42 control unit installed on sixth-generation Daily C70 vehicles (from 2020 onwards), accessing, reading, writing, and accurately modifying all management parameters.

An evolution designed for professionals who work every day with modern commercial vehicles and want to offer their customers a complete, efficient, and professional service.

Technical focus
Connection: BENCH
DCU: Bosch DCU17PC42
Production years: from 2020

Brands involved: Iveco
Supported vehicles
Iveco Daily 70C


KESS3 Adds Iveco Daily VI DCU17PC42 ECU on Bench

www.iecutool.eu

Comments

Post a Comment

Popular posts from this blog

PCMTuner Chevrolet SIM2K-D160 ECU Pinout

Image
 How to read a Chevrolet SIM2K-D160 ecu with pcmtuner ? Use this in Module 30, 1,3,5 — ECU ground (just connect one of the contacts) 77 — CAN-High 78 — CAN-Low 76 — K-Line 2 — +12V (ignition on) 4 — +12V (power supply of the main relay) 6 — +12V (non-switchable power supply) You may not be able to do this ECU in BSL 53 as main processor is MPC756MXP56 Second Processor TC1738. You could try OBD Module 30 Kia/Hyundai SIM2K 2.0L, 2.5L (SIM2K-D160) But failing that, you would have to do this in BSL mode 53 http://www.pcmtuner.org/pcmtuner-module-53-infineon-tricore-bsl-operation/
Read more

Foxflash Pinout to Mercedes SIEMENS VDO MSM2.0

Image
  Foxflash programmer will read and write Mercedes Benz gasoline SIEMENS VDO MSM2.0 ECU on bench. Here is the fox flash pinout to MSM 2.0. Select driver Mercedes Siemens ECUS 1.4/1.6 Siemends VDO MSM 2.0 FULL SYSTEM If old and new ecu have read flash and eeprom without problem. Write not work with foxflash. Have error. Cannot write any file as shown image below: After read flash/eprom — Disconnect ecu and restart software (unplug foxflash ) — restart Then connect again, Write flash, Also try lower power only need 13v on this ecu.
Read more

Foxflash Update DCM7.24 E38 E92 E83 E0 E39A via OBD

Image
 What's the difference between Foxflash and the new KT200 II 2nd generation ecu/tcu programmer? Foxflash: free online update to get more protocols. KT200 II: it's a separate new hardware with new protocols Foxflash: more stable KT200: less stable, often bricks ECU Foxflash: reading and writing is faster and stable in the long run. Direct update foxflash online to get KT200 II protocols for example: Marelli 8GMC BENCH Delco E38 OBD BENCH E67 BENCH E84 BENCH E92 OBD BENCH SIM2K-305 BOOT Bosch MG1CA007 BENCH Delphi DCM7.24 OBD Phoenix L40 OBD EDC17C11 BENCH BOOT MD1CS069 OBD BENCH New Clone function MEDC17 FCA HYUNDAI JAGUAR LAND ROVER SUZUKI TOYOTA Transmission protocols BOSH 6L45 6L50 6L80 6L90 BENCH see http://www.pcmtuner.org/foxflash-update-dcm7-24-e38-e92-e83-e0-e39a-via-obd/ Users are allowed to update the above protocols to foxflash directly online without purchasing any new hardware or adapters. Foxflash will continue to update more ECU/TCU prot...
Read more