Best Tools to Read Write FAW Weichai SID605 ECU

 What tool to read Chinese FAW WEICHAI Continental SID605 ECU? Here is the clue.


Top Tools to Read and Write FAW Weichai SID605 ECU

Alientech KESS3:

Why Suitable: A versatile tool supporting OBD, bench, and boot modes, KESS3 is compatible with Siemens/Continental ECUs, including SID605, for FAW and Howo vehicles. It offers comprehensive reading and writing capabilities and is regularly updated to support new protocols.

Modes: Boot Mode.
Key Features:

Supports SID605 for reading/writing software and calibrations in Boot mode.
Master version allows full file access; Slave version is more affordable for beginners.
Wide vehicle coverage, including diesel trucks.

Price: ~€700 (hardware) + €1,190 (Master) or €590 (Slave) for a 12-month subscription.
Best For: Professionals needing a multi-mode, high-performance tool for diverse ECU types.


Top Tools to Read and Write FAW Weichai SID605 ECU

MMS Flex:

Flex software V5.7.0.0 adds SID605 protocol

Mode: Boot

Function:

  • FAW JIEFANG Continental SID605 BOOT: Read/Write/Checksum Internal Flash; Read/Write External Eeprom; Full Backup
  • Shacman Continental SID605 BOOT: Read/Write/Checksum Internal Flash; Read/Write External Eeprom; Full Backup
  • Lonking Continental SID605 BOOT: Read/Write/Checksum Internal Flash; Read/Write External Eeprom; Full Backup
  • Shaanxi Continental SID605 BOOT: Read/Write/Checksum Internal Flash; Read/Write External Eeprom; Full Backup

CG FC200:

FC200 Software 1.2.4.0 adds

CONTINENTAL SID605 SPC564A test (Boot mode).

It is the test demo version.

Need luck.

Dimsport New Trasdata

Why Suitable:

New Trasdata can read and write SID605 ECUs that block OBD access due to anti-tuning systems. It supports direct connection to the ECU’s microprocessor, FLASH, and EEPROM, making it ideal for locked or encrypted ECUs like the SID605.

Modes: Boot
Key Features:

Reads/writes SID605 microprocessors and EEPROM.

Best For: Technicians comfortable with bench programming and handling encrypted ECUs.


Top Tools to Read and Write FAW Weichai SID605 ECU

CombiLoader v.3:

Requirement: Activate SID605/WISE15/MD1/EQ EDC17CV54 J2534 license.
Why Suitable: Specifically designed for reading and writing FLASH and EEPROM in various ECUs, including the SID605, without dismantling the ECU when possible. It supports diagnostic writing via the OBD port for SID605, making it a straightforward choice for FAW vehicles. The module also allows viewing, editing, and comparing firmware files in *.bin format for FAW J7/J6/Tiger trucks.

Function:
Read, write/calibrations of SID605 ECU

Mode: OBD
Key Features:

Reads and writes map areas via OBD.
Supports firmware editing for SID605-equipped vehicles.
Reliable for diesel engine ECUs in trucks.

www.iecutool.eu

Comments

Post a Comment

Popular posts from this blog

PCMTuner Renault EMS3155 ECU Pinout

Image
 Question: Has someone maybe pinout/Wiring diagram for Siemens ECU for Renault 237106288r EMS3155? Renault Megane IV 2016. I tried to read on bench with pcmtuner but no luck. Thank you Solution: Try module module 59: 1.2T EMS3155 UDS (TC1782/2.5MB) or module 22: Nissan: Juke 1.2T EMS3155 (TC1782/2560KB) you can try, UDS requires immobiliser authorization on many ECU so cannot do bench just read it in obd with pcm tuner . not start in bench because immo active and key.
Read more

Foxflash Update DCM7.24 E38 E92 E83 E0 E39A via OBD

Image
 What's the difference between Foxflash and the new KT200 II 2nd generation ecu/tcu programmer? Foxflash: free online update to get more protocols. KT200 II: it's a separate new hardware with new protocols Foxflash: more stable KT200: less stable, often bricks ECU Foxflash: reading and writing is faster and stable in the long run. Direct update foxflash online to get KT200 II protocols for example: Marelli 8GMC BENCH Delco E38 OBD BENCH E67 BENCH E84 BENCH E92 OBD BENCH SIM2K-305 BOOT Bosch MG1CA007 BENCH Delphi DCM7.24 OBD Phoenix L40 OBD EDC17C11 BENCH BOOT MD1CS069 OBD BENCH New Clone function MEDC17 FCA HYUNDAI JAGUAR LAND ROVER SUZUKI TOYOTA Transmission protocols BOSH 6L45 6L50 6L80 6L90 BENCH see http://www.pcmtuner.org/foxflash-update-dcm7-24-e38-e92-e83-e0-e39a-via-obd/ Users are allowed to update the above protocols to foxflash directly online without purchasing any new hardware or adapters. Foxflash will continue to update more ECU/TCU prot...
Read more

Foxflash, KESS3, Flex: Read Fiat Marelli 9DF ECU Easily

Image
 To read Fiat Magneti Marelli IAW 9DF ECU, you have 3 options: 1.Flex in boot mode You have to open the ecu or make a hole in the center of the inscription "Magneti" Marelli" and connect the starter through the hole With Flex you can have a vr file but it doesn’t can’t write in obd. 2. Use Kess3 , Foxflash , fgtech, autotuner for obd read and obd write (To read, you need 2 hours, to write 10/15 minutes) it makes a Reading in 2h23 For mj9dfhw001 fiat ducato using foxflash. HW001 obd Hw002 boot, 5 minutes of work with opening the computer, FoxFlash takes a long time to read and write. with kess3 OBD 1:30 reading, 15 min writing. with autotuner, he does it pretty fast but only in virtual reading and reading and writing via Obd 3. Use ktag, fgtech, dfox, in jtag by open ecu. FYI: Depends on hardware version. bench is the same 2.30 hours of reading and but sometimes impossible to write. HW000 is ok to write on bench. 0001 0002 impossible to write a mod. R...
Read more