FormulaFlash 1.0.1.0 One-Click IMMO OFF for EDC17 MED17

 We are thrilled to announce the release of a major update for FormulaFlash, designed to expand its capabilities and provide even greater efficiency.

What’s New in Version 1.0.0.10?
This update introduces a comprehensive list of ECU and ME/EDC/MED variants now supported for One-Click Immo Off solutions, ensuring faster and more reliable service.

Read/write and immo off direct in software!!!

Added EDC17 Modules
• EDC17Cxx Series:
EDC17C04, EDC17C06, EDC17C08, EDC17C10, EDC17C11, EDC17C18, EDC17C19, EDC17C41, EDC17C42, EDC17C43, EDC17C46, EDC17C47, EDC17C49, EDC17C50, EDC17C53, EDC17C54, EDC17C55, EDC17C56, EDC17C57, EDC17C58, EDC17C59, EDC17C60, EDC17C61, EDC17C63, EDC17C64, EDC17C66, EDC17C69, EDC17C70, EDC17C72, EDC17C73, EDC17C74, EDC17C76, EDC17C79, EDC17C81, EDC17C83, EDC17C84, EDC17C87.
• EDC17CPxx Series:
EDC17CP01, EDC17CP02, EDC17CP04, EDC17CP05, EDC17CP06, EDC17CP07, EDC17CP09, EDC17CP10, EDC17CP11, EDC17CP14, EDC17CP15, EDC17CP16, EDC17CP18, EDC17CP19, EDC17CP20, EDC17CP22, EDC17CP24, EDC17CP27, EDC17CP37, EDC17CP42, EDC17CP44, EDC17CP45, EDC17CP46, EDC17CP47, EDC17CP48, EDC17CP49, EDC17CP50, EDC17CP52, EDC17CP54, EDC17CP55, EDC17CP57, EDC17CP58, EDC17CP60, EDC17CP62, EDC17CP65, EDC17CP68, EDC17CP74.
• EDC17CV Series:
EDC17CV41, EDC17CV42, EDC17CV44, EDC17CV45, EDC17CV52, EDC17CV54, EDC17CV56.
• EDC17U Series:
EDC17U01, EDC17U05.
Added ME17xx Modules
• ME17 Series:
ME17.0.3, ME17.1.1, ME17.1.6, ME17.2, ME17.2.1, ME17.2.4, ME17.2.42, ME17.3.0, ME17.5.20, ME17.5.22, ME17.5.24, ME17.5.26, ME17.5.6, ME17.7, ME17.7.20, ME17.7.8, ME17.8.3.3, ME17.8.31, ME17.8.32, ME17.8.33, ME17.8.42, ME17.8.5, ME17.8.8, ME17.9.1, ME17.9.11, ME17.9.11.1, ME17.9.20, ME17.9.21, ME17.9.21.1, ME17.9.23, ME17.9.5, ME17.9.51, ME17.9.52, ME17.9.53, ME17.9.55, ME17.9.56, ME17.9.6, ME17.9.61, ME17.9.64, ME17.9.7, ME17.9.71, ME17.9.74, ME17.U.6.
Added MED17xx Modules
• MED17 Series:
MED17.0, MED17.0.1, MED17.0.7, MED17.1, MED17.1.1, MED17.1.10, MED17.1.11, MED17.1.12, MED17.1.21, MED17.1.27, MED17.1.6, MED17.1.61, MED17.1.62, MED17.2 TC1766, MED17.2 TC1796, MED17.2.2, MED17.3.1, MED17.3.3, MED17.3.4, MED17.3.5, MED17.4, MED17.4.4, MED17.5, MED17.5.1, MED17.5.2, MED17.5.20, MED17.5.21, MED17.5.25, MED17.5.5, MED17.6.9, MED17.7.1, MED17.7.2, MED17.7.3, MED17.7.3.1, MED17.7.5, MED17.7.7, MED17.7.8, MED17.8.10, MED17.8.10 HW2, MED17.8.2 HW2_TC1782, MED17.8.2 TC1767, MED17.8.3, MED17.8.31, MED17.8.32, MED17.9.3, MED17.9.30, MED17.9.63, MED17.9.7, MED17.9.8, MED17.9.9.

Why Update?
This release provides unmatched ECU coverage and simplifies the immobilizer removal process with One-Click Immo Off solutions. Experience enhanced functionality, speed, and compatibility across a vast range of vehicle control modules.


FormulaFlash 1.0.1.0 Update EDC17 MED17 One-Click IMMO OFF
FormulaFlash 1.0.1.0 Update EDC17 MED17 One-Click IMMO OFF

https://www.iecutool.eu/info/formulaflash-software-update-to-1.0.1.0.html

Comments

Post a Comment

Popular posts from this blog

FoxFlash Read and Write Volvo Denso MB279700-9xxx

Image
 Foxflash Volvo Denso MB279700–9xxx works perfectly, just follow the steps of foxflash , reading, unlocking, and writing all done on the bench. PROCEDURE: 1 — Read the Ecu AND unlock the Ecu 2 — Write the ECU READING AND UNLOCKING: Connect the following pinout using the multifunction cable. Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit. WRITING: Now it will be possible to reconnect the control unit to the car and write the modified file via OBD. Use the following driver: CAR > VOLVO > Model >2.0 DENSO MB279700 9641 SH72546R CAN Alternatively, you can WRITE also the ECU on the table using the pinout on the next page. Note: Compared to the read pinout, the CAN line is moved. FOXFLASH PINOUT FOR WRITING: Just follow the foxflash instructions: read file 15 min, unlock
Read more

PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

Image
 SIMOS 8.6 requires unlocking in BSL mode by the appropriate module. BSL is usually boot mode for unlock. Same as PCR2.1 . Example: Audi A7 2012 2.8 fsi simos 8.6 unlock, after read/write simos8.6 with pcmtuner successfully. all resistor 1 kom How to work with blocks that require unlocking (PCR2.1, SIMOS8.6): 1) Check the current lock status in the car, if the check is disabled, you can go to read-write, otherwise follow the instructions 2) Remove the unit from the car, open it, transfer the processor to BSL mode using the connection below (PCR2.1, SIMOS8.6), the work as a whole as in the package 53 (you can use tools like powerbox, and you can do without them) SIMOS8.6 Unlock pcmtuner pinout Red — +12, Black — GND, Yellow — CAN-HIGH, Blue — CAN-LOW 3) Choose "SIMOS8.6 (EEPROM/UNLOCK/BSL) or PCR2.1 (EEPROM/UNLOCK/BSL)" depending of ECU type 4) Click Identification — save ECU data somewhere in a text file. 5) Click Read — save the EEPROM 6) Given that EC
Read more

Read/Write BMW MSV70 DME by Foxflash, Ktag or FC200?

Image
 Which tool to read this computer BMW MSV70 DME? Foxflash : Yes, via BDM Jtag Connect multifunction cable as follows: Solder the dip/sip connectors on the pcb and do a link: Insert Siemens/Marelli adapter as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x Ktag / Kess V2 : Need luck. The best option is BDM. Sometimes Kess v2 and ktag clone read ok but failed during writing, checksum error. Ori Kess done well OBD but takes long. Easy to remove and run in bdm. CG FC200: FC200 programmer does not support this computer.
Read more