Foxflash Read Renault Sim32 by OBD or Jtag
Possible to read and write Renault Simens SIM32 with foxflash? by OBD, bench or jtag?
Yes, foxflash will read and write SIM32 (if it is not encrypted), both OBD and jtag. No bench.
OBD mode:
tested working. for example, E85 solution on Renault Twingo 1.2: Ecu Siemens Sim 32 Read & Write ok in OBD.
Jtag mode:
Siemens SIM 32 — Renault Boot pin to Foxflash
Kit to use:
– Multifunction cable
– Flat cable
– 1 resistance 320Ω
Connect multifunction cable as follows:
To READ the ECU solder the rainbow flat cable. Use
the driver:
→ BDM /
JTAG MODE
→ JTAG RENESAS
→ AUD SH xxxxx
To WRITE the ECU connect the white, violet and bicolor grey/red of the
multifunction cable, and solder a resistance 320Ω.
Use the following
driver:
→ TOOL BOOT
→ RENESAS
→ SH xxxxx BOOT MODE
Comments
Post a Comment