PCMTuner, Ktag or Foxflash to Read Mecedes CRD11?

 Question:

Can pcmtuner read this Delphi CRD 11 ECU from Mercedes. or other tools?

PCMTuner will not read crd11.

Ktag will read and write via BDM.

ECU — Ktag
3–6
2–1
4–5
6–10
8–7
10–8

And make 2 Bridge.

Ktag Protokoll 119
Ecu Delphi DCM3.2 CRD.11

Foxflash/KT200 will read it via OBD or Jtag.

Foxflah pinout to Delphi CRD 11

1). Kit to use for connection with JTAG flat cable:
– Multifunction cable
– Flat color cable

Connect multifunction cable as follows:

Solder the rainbow flat cable as in the photo:

To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x

3). Kit to use for connection with BDM adapter:
– Multifunction cable
– Delphi adapter
– Grey flat cable
– Connectors dip/sip

Connect multifunction cable as follows:

Do a link as in photo:

Solder the dip/sip connectors on the pcb:

Insert Delphi adapter in REVERSE as in photo:

To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x

www.iecutool.com