Foxflash Cannot Read BMW EDC16C1 Solution

 Here comes the problem:

A user reported that he cannot connect BMW ECU EDC16C1 with foxflash tool. failed to read, tried 3 different pinouts according to instructions on software with no result.

Possible Reason:

Different HW version.

Pinout on FoxFlash could work for other c1 versions but not for this one.

Solution:

1.Check connection and power supply

Pinout (K-Line):

*Watch white cable because there is also a white/red cable in package.

If error remains,

2.Try Pinout (with CAN-Line)

PIN1&7–12V

PIN2 — GND

PIN8 — Kline

PIN46 — CanH

PIN33 — CanL

Connect it on Bench Mode.

If error remains, remove Bench Box,

and connect to device on OBD Mode using GT100 Breakout Box + an extra power supply

Feedback:

I have a connection with the ecu!