PCMTuner PSA EDC17C60 Car Not Start After Writing Solution

 Here comes the problem: Finally got my edc17c60 writing with pcmtuner flash, but car doesn't start after 2nd attempt.

Citoren C4 1.6 blue HDi 2016
the first reading was made in bench module 71.

PCMtuner writing to PSA EDC17C60 ECU bricking

Solution:

PSA EDC17C60 is tprot. You need to do manual tprot change to file before writing

https://www.iecutool.com/service/pcmtuner-psa-edc17c50-manual-tprot-off.html

You have to Tprot Ori file too if you want to write back.

Feedback:

Solved. Wrote original file and wrote back the tuned file with checked use optimizations.

Car cannot start after PCMtuner writes to PSA EDC17C60 ECU


Comments

Popular posts from this blog

PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

How to Find Bosch ECU Serial Numbers and Correct Pinouts

FoxFlash Read and Write Volvo Denso MB279700-9xxx