PCMtuner-tool

 Subaru Outback 2016 Denso LP ECU, will Foxflash read and write on bench? Yes, FoxFlash can read and write the Denso LP (ECU) on a 2016 Subaru Outback via bench programming. Here’s what you need to know: – FoxFlash supports Denso LP ECUs. – Bench programming allows you to read and write the ECU without connecting to the vehicle. – Ensure you have the correct FoxFlash hardware and software versions. – Follow proper procedures for bench programming to avoid damaging the ECU. Some additional tips: – Make sure to backup the original ECU data before making any changes. – Use the correct adapter and wiring for bench programming. – Follow FoxFlash’s instructions and guidelines for Denso LP ECUs. If you’re unsure or lack experience with bench programming, consider consulting a professional tuner or seeking guidance from a trusted source. www.iecutool.eu

 User report: CG FC200 read and write Ford Ecosports 2020 ecm successfully. select Bosch EDC17C70 TC1793 Check wiring diagram Read ID ok Read dflash and pflash ok Write dflash and pflash ok. checksum by FC200. www.iecutool.eu

  Foxflash read Volkswagen Lupo 1,4 16v gasoline ECU successfully. It is a Marelli IAW 4MV ECU. Read on bench ok. Badly soldered but works. eeprom ok. Select VW->Lupo ->Marelli IAW 4MV Not possible to read via OBD.

 What is the difference between CG FC200 and CG100X programmers? They are different programmers. FC200 : used to read, write and clone engine ECU and transmission gearbox TCUs . FC-200 could be useful for BMW ISN from Ecu or maybe for some Ecu cloning. FC-200 supports most bosch ecus but has more pinout diagram for every ECU it supports and more user friendly, CG100X: CG100X is the upgrade version of CG100 Prog III. CG100X adds more airbag, eeprom and mileage correction models. CG100X Programmer also can do VW MQB dashboard mileage correction while FC200 cannot. FC200 does not have airbag or mileage capacities. www.iecutool.eu

  Problem: My CG FC200 programmer shows the device activation time remains 26 days. But software subscription is still active. Solution: FC200 will activate (renew) every 30 days. When it counts to 0, it will automatically renew for another 30 days (MUST enable network connection to activate fc200 again).

  Problem: I tried to clone an ECU with CG FC200 programmer, but it asks for an authorization code, where to get this code? Solution: Users are required to connect network to access FC200 server to get the authorization code for checksum correction when doing ECU cloning.

  Problem: I tried to read Alfa Romeo M10JA ecu via car OBD and foxflash failed to read. Solution: If failed to read M10JA ECU via OBD, read it in boot mode. MARELLI 10JA — FCA, Alfa Romeo boot pin (BAM connection) to foxflash To read and write use the following driver: ->TOOL BOOT ->TOOLS BOOT MODE ->Motorola Freescale BAM ->Freescale SPC5777C www.iecutool.eu