PCMtuner-tool

  Problem: Bosch EDC17CP20 pcmtuner flash can not read and password required Volkswagen Caravelle 2014 2.0L diesel, any idea? Solution: Bputting in BSL boot mode, you need to read password via module 71, then AFTER you have saved password, switch to module 53 and put ecu in BSL bootmode. Then when asked, select the password you saved. if unable to read password, then unable to do job if cannot use 71. only option left is OBD. PCMTUNER Module BSL 53 Instruction

 Iveco daily Bosch edc17c49 ecu read and write with pcmtuner module 71 on bench, dpf off all ok 10uf, 100uf 25v capacitor all work. capacitor in serial with GPT1 10uF to 100uF, + to pcm as ecu sinks signal if you have issues connecting to CP52 or C49 Iveco , use 47uF instead of 10uF.

  Problem: I just installed pcmtuner flash 1.2.7 when I go to open the program it doesn’t show the interface… Have I forgotten any procedure? Solution: You just installed pcmtuner flash, you need to install the complete pcmtuner package, download the PCM Suite package from tuner-box.com. Follow installation here to set up PCM Suite. www.iecutool.com/upload/pro/22030716466535964419.pdf

 Here iecutool.com collects some frequently asked questions about the black version Fetrotech Tool . Q: What software will be used? As PCMtuner is just info, pcmflash performs readouts. A: It use Fetrotech software. Q: I have a question. if I buy Fetrotech black standalone, do I have to buy another module or things for use it ? Thanks. A: No, you can use as a separate tool, no need for anything else to use it. Q: I have PCM tuner , is better to buy the silver version or the black version? I think Standalone is better to buy, what will you say A: You can use both black and silver version if you have pcmtuner. silver version is cheaper. If have enough budget, get a black version, it works sperately, also can work wtih pcm tuner. Q: what's the difference between the Fetroteck black and silver version? A: check comparison here http://www.pcmtuner.org/fetrotech-tool-black-vs-silver/ Q: Where to check the ECU coverage of Fetrotech plugin? A: http://www.pcmtuner.org/pc

 Question: Has someone maybe pinout/Wiring diagram for Siemens ECU for Renault 237106288r EMS3155? Renault Megane IV 2016. I tried to read on bench with pcmtuner but no luck. Thank you Solution: Try module module 59: 1.2T EMS3155 UDS (TC1782/2.5MB) or module 22: Nissan: Juke 1.2T EMS3155 (TC1782/2560KB) you can try, UDS requires immobiliser authorization on many ECU so cannot do bench just read it in obd with pcm tuner . not start in bench because immo active and key.

 Question: Does anyone have pinout for edc17cp60 mercedes? I did not found it in pcmtuner app ? Solution: Here is the pcmtuner edc17cp60 pinout. 12V– T58 Pin3 Ign — T58 Pin 15 Gnd — T58 Pin 4 Can+ T58 Pin 41 Can- T58 Pin 54 S1– T96 Pin 38 S2– T96 Pin 87 Or use this pinout, it is the same You can also read it OBD on car. One of our customers has tested it working fine OBD read/write/checksum.

 Firstly, Many thanks to the users for their support and love for PCMtuner . After the 1.2.7 version update, all users need to download the PCM Suite installation package from the following website and install it. Please download the PCM Suite installation package and install it from the website (www.tuner-box.com). You can get the 1.2.7 version of the software. The picture is as shown below: After downloading, unzip and install. After installation Double click the desktop to run PCMtuner Flash As the picture shows below: Copy the machine code according to the software prompt, and send it to the mailbox (info@tuner-box.com). Please send the machine code (device ID) together with the serial number on the back of your PCMtuner hardware device to the mailbox to request the activation certificate in order to activate your PCMtuner Flash software. Usually the digital certificate will be returned within 30–40 minutes once we confirm that you are a legitimate user, from