Autotuner Mail-in Unlock Add 2022+ Bosch MD1CS016 ECUs

 The core of the European car market is on AutoTuner! Tune the modern diesel powertrains (Blue dCi) from the Renault and Dacia lineup with your AutoTuner Tool.

Great news for all tuning specialists working on the French and European car park! We are thrilled to announce that the Bosch MD1CS016 ECU is now officially supported on your AutoTuner Tool.

This latest-generation ECU manages the modern diesel powertrains (the widely popular Blue dCi engines) that power a massive share of the market, ranging from essential daily drivers to the most relied-upon commercial vans in the Renault-Dacia group.

Method: Bench (After Mail-in Unlock) To protect this highly sought-after solution and guarantee you a lasting competitive advantage, this protocol requires the ECU to be sent to our facility first. Once our team has completed the Mail-in Unlock, you will be able to read and write the ECU via Bench directly in your workshop.

Supported Highlights:

Renault Clio, Megane, Kadjar, Koleos, Captur
Renault Kangoo, Trafic, Master
Dacia Duster, Lodgy
Nissan Quashqai, NV300, Primastart
Mercedes Citan

Get your shipping boxes ready! The potential volume of vehicles to tune (both private and commercial) is absolutely massive.

Key Features

  • Type: Engine Control Unit (ECU)
  • Mode: BENCH NR
  • MCU: TC399
  • Read time: 2min 30sec
  • Write time: 30sec
  • Checksums correction
  • Backup creation
  • Mail-in Unlock required

Compatibility List*

Dacia Models: Duster (2018) / Lodgy (2020)
​​​​​​​Dacia Engines: 1.5 DCI EU6d full
Mercedes Models: Citan (2021)
Mercedes Engines: 1.5 DCI EU6d full
Nissan Models: NV 300 (2016) / Primastar (2021) / Qashqai (2017)
Nissan Engines: 1.5 DCI EU6d full / 2.0 Blue dCi / 2.0 Blue dCi EU6 full
Renault Models: Captur / QM3 (2019) / Clio (2019) / Kadjar (2018) / Kangoo (2024) / Koleos (2020) / Master (2024) / Megane (2020) / Trafic (2019)
Renault Engines: 1.5 DCI EU6d full / 2.0 Blue dCi / 2.0 Blue dCi EU6 full

  • The list may evolve over time.

Autotuner Update 2022+ Bosch MD1CS016 ECUs


Comments

Post a Comment

Popular posts from this blog

PADFlash Software Free Download for ECU TCU Programming

Image
 The PADFlash ECU TCU programmer software is now available for free download on its official website. Website address: http://www.padflashr.uk/download.html From there, you can: Check the driver list and download the PADFlash Updater Tool Manager . View the support list by vehicle brands to see which models are compatible with the software. Laptop requirement: Compatible operating systems: Windows 7 Windows 10 CPU>2.5GHz (Intel i5, i7) RAM> 4GB OS 64bit Laptop needs with USB 2.0 port and USB 3.0 port at the same time. After installing the PADFash updater tool, follow this guide to activate PADFlash software. http://www.pcmtuner.org/how-to-use-padflash-software-after-activation-on-win10/
Read more

Foxflash Pinout to Mercedes SIEMENS VDO MSM2.0

Image
  Foxflash programmer will read and write Mercedes Benz gasoline SIEMENS VDO MSM2.0 ECU on bench. Here is the fox flash pinout to MSM 2.0. Select driver Mercedes Siemens ECUS 1.4/1.6 Siemends VDO MSM 2.0 FULL SYSTEM If old and new ecu have read flash and eeprom without problem. Write not work with foxflash. Have error. Cannot write any file as shown image below: After read flash/eprom — Disconnect ecu and restart software (unplug foxflash ) — restart Then connect again, Write flash, Also try lower power only need 13v on this ecu.
Read more

Compare Launch X-prog3 and Autel XP400 Pro Features

Image
 The Launch X-prog3 is on the same level as the autel xp400 pro where it is more limited? in which the Autel is more powerful? Here is the clue. Launch X-Prog3 (GIII) A professional immobilizer and key programmer, often used with Launch X431 diagnostic tablets (e.g., X431 V+, Pro5, PAD VII). Specializes in ECU/TCU cloning, key programming, and immobilizer functions for a wide range of vehicles. Known for its integration with Launch’s ecosystem and built-in features like MQB AKL sync data calculation. Autel XP400 Pro An advanced key and chip programmer that works with Autel MaxiIM tablets (e.g., IM508, IM608, IM608 Pro). Excels in transponder chip reading/writing, immobilizer functions, and ECU/MCU programming. Offers standalone capabilities on PC but is most powerful when paired with Autel MaxiIM tools. Comparison Table Pros and Cons Launch X-Prog3 Pros: Excellent for ECU/TCU cloning. Built-in MQB AKL sync calculator for VW/Audi. Seamless integration wi...
Read more