OBDSTAR DC706: Makes ECU Cloning Easy by OBD or Bench

 OBDSTAR DC706 ECU Tool is a ECU flasher used for vehicle ECM, TCM, body and other system. Supports to read ECU info, read & write Eeprom/Dflash/Pflash/MAP, reset ECU(virgin), calibrate mileage, read IMMO pincode, recover ECU by OBD or bench mode.

Supported ECU Manufacturers:

ALPS, Autoliv, Bosch, Continental, Delphi, Denso, Johnson Controls, Lear, Magneti Marelli, Siemens, Temic, Valeo.

Supported Car:

ASTON MARTIN, BMW, FAW, FCA(ALFA ROMEO, CHRYSLER, DODGE, FIAT…), FORD/LINCOLN, GM/OPEL, HYUNDAI/KIA, LAND ROVER/JAGUAR, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN, OPEL, PSA, SMART, SUBARU, SUZUKI, VOLVO, VW/AUDI/SEAT/SKODA.

Supported Motorcycle:

APRILIA, BRP, CFMOTO, DERBI, GILERA, GUZZI, PEUGEOT, PIAGGIO, QJBENELLI, VESPA.

OBDSTAR DC706 Clone Volvo MPS6 TCM by Bench

  • Accessories

      • DC706

      Main cable

      P004 adapter

      P004 jumper

      MPS6 TCM

    1. Operation

        2. ECU flasher >> TCM >> Latest version >> Volvo Getrag MPS6 TC1766(BENCH) >> Guide/Pinout

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 ECU Clone by OBD or Bench

        Connect all accessories together according to instructions.

        Turn P004 adapter switch to ON, DO NOT press ignition button.

        Start >> Connect

        This function is available by connecting the server, please ensure the internet connection is normal.

        Switch ignition off.

        Turn on the ignition.

        Now we can check ECU info, read & write INT/EXT eeprom, read & write INT flash.

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 ECU Clone by OBD or Bench

        OBDSTAR DC706 Clone FCA RFHUB/RFHM by Bench

      1. Accessories

          2. DC706

          Main cable

          P004 adapter

          P004 jumper

          FCA RFHUB/RFHM module

        1. Operation

            2. ECU flasher >> Body/Other >> Latest version >> FCA keyless continental 9S12XEQ384/9S12XEG384/9S12XET512+95640(BENCH) >> Guide/Pinout

            Connect all together according to instructions.

            Turn ignition on and switch to ON.

            Start >> OK >> Connect

            Now we can read & write eeprom, pflash, pincode as needed.

            OBDSTAR DC706 ECU Clone by OBD or Bench

            OBDSTAR DC706 ECU Clone by OBD or Bench

            OBDSTAR DC706 Clone GM ACDelco E39AECM by Bench

          1. Accessories

              2. DC706

              Main cable

              P004 adapter

              P004 jumper

              ACDelco E39A ECM

            1. Operation

                2. ECU Flasher >> ECM >> Latest version >> Buick ACDelco E39A(BENCH) >> Guide/Pinout

                Connect all together according to instructions.

                Turn on ignition & switch.

                Start >>standard mode/ recovery mode >>OK >> Connect

                Now we can start to clone.

                OBDSTAR DC706 ECU Clone by OBD or Bench

                OBDSTAR DC706 ECU Clone by OBD or Bench

                www.obdexpress.co.uk

                Comments

                Post a Comment

                Popular posts from this blog

                PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

                Image
                 SIMOS 8.6 requires unlocking in BSL mode by the appropriate module. BSL is usually boot mode for unlock. Same as PCR2.1 . Example: Audi A7 2012 2.8 fsi simos 8.6 unlock, after read/write simos8.6 with pcmtuner successfully. all resistor 1 kom How to work with blocks that require unlocking (PCR2.1, SIMOS8.6): 1) Check the current lock status in the car, if the check is disabled, you can go to read-write, otherwise follow the instructions 2) Remove the unit from the car, open it, transfer the processor to BSL mode using the connection below (PCR2.1, SIMOS8.6), the work as a whole as in the package 53 (you can use tools like powerbox, and you can do without them) SIMOS8.6 Unlock pcmtuner pinout Red — +12, Black — GND, Yellow — CAN-HIGH, Blue — CAN-LOW 3) Choose "SIMOS8.6 (EEPROM/UNLOCK/BSL) or PCR2.1 (EEPROM/UNLOCK/BSL)" depending of ECU type 4) Click Identification — save ECU data somewhere in a text file. 5) Click Read — save the EEPROM 6) Given that EC...
                Read more

                FoxFlash Read and Write Volvo Denso MB279700-9xxx

                Image
                 Foxflash Volvo Denso MB279700–9xxx works perfectly, just follow the steps of foxflash , reading, unlocking, and writing all done on the bench. PROCEDURE: 1 — Read the Ecu AND unlock the Ecu 2 — Write the ECU READING AND UNLOCKING: Connect the following pinout using the multifunction cable. Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit. WRITING: Now it will be possible to reconnect the control unit to the car and write the modified file via OBD. Use the following driver: CAR > VOLVO > Model >2.0 DENSO MB279700 9641 SH72546R CAN Alternatively, you can WRITE also the ECU on the table using the pinout on the next page. Note: Compared to the read pinout, the CAN line is moved. FOXFLASH PINOUT FOR WRITING: Just follow the foxflash instructions: read file 15 min, unl...
                Read more

                How to Find Bosch ECU Serial Numbers and Correct Pinouts

                Image
                 Here is basic post for people asking basic questions, apparently now on high demand since we have gathered again new members in our ECU group . So you got bosch ecu in hand from car and how to figure out how to identify it and what pinout to use? On this case we can randomly take one bosch ecu that we will identify. So all bosch ecus start with serial numbers 028… 026. We just head to bosches page next https://www.bosch-repair-service.com/ Here you search by oe or bosch number, i have random bosch ecu here and it’s 0 281 014 544 and bosch page ends up with a result. We can see its edc16cp35. Now there are two ways. Either to search in foxflash bmw / edc16cp35 for pinout. Or we head to ecu pinout page and figure out pinout from there. One of the best online pinout catalogs can be found at ecu desing, So save webpage https://ecu.design/ecu-pinout/ Copy address and head out there. Type in edc16cp35, bmw uses two processors in this one mpc 562 and mpc564. Pinouts jus...
                Read more