PCMtuner-tool

  Magic Motorsport Flex boot glitch unlock new user report: "Fiat Ducato Bosch MD1CS069 locked ECU. Md1cs069 working with two resistors 2.2 in serial. or take 10 resistors with 0R5. A lot of people wrote that they can’t successfully connect the md1cs069 and there is no concrete answer why it doesn’t work, that’s why I made this post to work on 4.4 ohms as well as 3.3 and 5 ohms, I had 2.2 ohms from the airbag, most electronics guys have them so it can be done like that. I did an unlock in the boot glitch and later read and wrote in the bench."

 Ford Ranger Super Duty (MD1CP062): Live via OBD on the Autotuner tool! The coverage of our Ford MD1CP062 protocol is expanding on your AutoTuner Tool & on the One ! The king of heavy towing is joining the compatibility list. Tune the massive torque of the new Ford Ranger Super Duty equipped with the mighty 3.0 V6 Ecoblue engine. A fast, simple, and ultra-reliable solution directly through the diagnostic port! Update your tools today and unlock the full potential of this extreme pick-up truck. Key Features: Type: Engine Control Unit (ECU) Mode: OBD NR Readout: Software + Calibration MCU: TC389 Read time: 7min Write time: 3min 30sec Checksums correction Compatibility List*: Ford Model: Ranger Super Duty Ford Engine: 3.0 V6 Ecoblue *The list may evolve over time. For our customers in the USA and Canada, this update expands an already massive lineup of supported Ford ECUs, and offers a way to tune that feels a little more American in spirit. Keep more of what yo...

  Magic Motorsport Flex new boot glitch unlock testing report: 2024 BMW MG1CS201, first 3 glitch attempts no connection. Added 5 ohm resistor and within 10 seconds it connected to the DME. Full backup and unlock successfully. Checked flash and obd2 unlock bytes are same as pre-2020. Add the resistor between boot pin. It can retrieve ISN code. Images attached:

 THE ULTIMATE BMW & MINI DIESEL UPDATE: Bosch MD1CS015 & MD1CS115 DDE9 go live on Bench after Mail-in Unlock! The absolute bread and butter of modern diesel tuning hits your workbench! Your AutoTuner Tool now supports the latest-generation Bosch ECUs powering almost the entire recent diesel fleet from BMW and Mini. From ultra-popular 4-cylinders to flagship twin-turbo straight-six engines, including modern Mild-Hybrid (MHEV) powertrains, you now hold the key to delivering massive torque gains and optimized fuel economy! Process: Bench (After Mail-in Unlock) ECU Models: Bosch MD1CS015 & Bosch MD1CS115 Safety first: Full reading & flashing right on your workbench — no ECU opening required. Massive Fleet Support (2022 to 2027 models): BMW 4-cylinder MHEV: X1, X2, 5-Series, Active Tourer Mini MHEV: Brand-new Countryman 2.0d (2024+) BMW 6-cylinder MHEV: 5 & 7-Series, X5, X6, X7 Just send the ECU to our facility for a secure hardware unlock. Once it’s...

  Formulaflash will release a software update on July 20th, 2026. Formula Flash V1.1.8.0 This update adds read/write and checksum support for some ECUs, including Continental SID310, Ford EMS2101/EMS2102/EMS2103, and Magneti Marelli IAW series, together with 10 new HO2 OFF solutions and comprehensive protocol support for DQ250 TCU. UPGRADE HIGHLIGHTS MORE PROTOCOLS Added support for 11 new ECU protocols across multiple brands. FLEXIBLE MODES Support for BOOT, BENCH and OBD where applicable. CHECKSUM SUPPORT Bench mode with checksum ensures data integrity. BETTER PERFORMANCE Continuous optimization for more stable and faster operations. NEW FUNCTION PART 2 AVAILABLE IN USER CENTER Upload file on the webpage to use this function. Data Processing — HO2 OFF.

  Magic Motorsport Flex read and write PSA Valeo VD56.12 ECU successfully. Flex has the diagram. You searched for "VD56" or check pinout in image 3 below. Read and write in boot mode ok. Flex does the checksum correction. But Flex cannot 1:1 clone this ECU. Even after successful read/write to donor ECU no start and loads faults. Only do immo off or use an emulator solution. NOTE: Some versions of VD56.1 can’t be done with flex. Does not go in boot mode. Dimsport NewGenius and Autotuner do the unit without problem. If it is Continental board flex will read it if is vitesco, use autotuner. Autouner can read without issue both.

 If OBDSTAR ECU Master programmer fails to read the ECU, TCU, or BCM, or has other faults, you can upload the log data for OBDSTAR engineers to analyze. Uploading log data is simple — just follow these steps. Go to Support section. Choose Log Upload function. Hit U pload and select the log data you need to report to OBDSTAR.