PCMtuner-tool

  Magic Motorsport Flex programmer released an important update yesterday: supports Bosch MDG1 ECU boot mode unlock without shipping (No RFT). Here comes the latest Flex user’s test report on BMW Bosch MG1CS201 encryoted ECU unlocking: It takes so long time. But finaly did it. Use standard Magic Motorsport power supply. Boot mode unlocking ok. After unlocking it become standard bench protol as everyone have already. After this unlocking and if they flash back on stock will Ecu be locked again? Mope. It will stay unlocked. The methods are different. This is security bypass by hardware glitch, then unlock with patch. Autotuner doing this with software glitch.

 Read and write Ford Kuga DCM6.1 ECU with Foxflash programmer by OBD successfully. Ford Kuga 2016, 2.0, 110kw, ECU: DCM6.1 Mode: OBD HW: DS71–12B684-XB Read by foxflash. Checksum correction with foxflash. Write by foxflash. A short story. A quick internet search for the ecu identification numbers gave me a result that the ecu was DCM3.5 (140hp) Wrong… It wasn’t!!! Foxflash did the ID even I selected DCM3.5 , I received the error SK2, Error SilentKey when reading. After I selected the correct ecu DCM6.1 (150hp) everything was fine.

  Problem: Tried to clone VW Golf 8 DQ400E gearbox TCU with Magic Motorsport Flex programmer but won’t connect. All pinned up correctly and on power supply. Won’t connect at all. Can hear it when pinned up. Any advice? Solution: Some users reported that VW Golf 7 works fine but Golf 8 won’t connect. Use a multimeter to measure your Flex pins, it’s a common issue for them to have no contact inside. Check wire and pins. Try to disconnect and connect back power supply to gearbox during connection establishing. If still not working, send log to MMS support or use other device. Launch X-prog3 read it fine. Read it with Launch + Xprog/ Launch X431 ECU programmer and it reads fine.

 VAG DIESEL EVOLUTION: Full BENCH coverage for Bosch MD1CS004 & MD1CS104 ! Already using our OBD solution for certain MD1CS004 H80 variants? It’s time to level up! Many recent software versions were left locked due to factory updates. Thanks to the Mail-in Unlock service on your AutoTuner Tool , we are smashing those limits: you now gain full Bench access, covering ALL MD1CS004 versions previously unsupported via OBD, while adding the brand-new MD1CS104 ( up to 2025 models)! Protocol Highlights: Mode: Bench NR (After Mail-in Unlock) Insane Speeds: Read ~2 min | Write ~30 sec Safety: Full Backup creation (Bootloader + SW + Cal) & automated Checksums. Endless Fleet Coverage: VAG 2.0 TDI (30/35/40 TDI & GTD): Golf 8, Passat, Tiguan, Formentor, Octavia, and the new 2025 VW Tayron. Heavy-duty Vans: Transporter T6/T7, VW Crafter, MAN TGE. Ford Clones: Transit & Tourneo 2.0 EcoBlue. Send the ECU to our headquarters for a secure hardware unlock. Onc...

 Good news! FormulaFlash ECU programmer released new software version V1.1.7.0- GM POWER UPGRADE IS HERE! It got the GM Acdelco E88 ECM!!! 15 NEW GM Applications Added: New support for GM ACDelco E88 / E90 / E93 ECUs Chevrolet, GMC, Opel, Vauxhall & GL8 coverage expanded Bench, Boot & OBD Read/Write/Checksum functions More vehicle coverage, more tuning opportunities. New Supported Vehicles: Chevrolet Equinox III (1.5T) Chevrolet Malibu IX (1.5T) GM GL8 (2.0T) Opel/Vauxhall Astra K (1.4T) Chevrolet Tahoe V (5.3L / 6.2L) Chevrolet Silverado LD/HD GMC Sierra LD/HD FormulaFlash continues to grow with wider coverage, better performance, and professional-grade stability. Update now to Version 1.1.7.0 and unlock 15 new GM applications!

 Each serious tool on "pro" level has its own research and development team who daily push the boundries on what ecus/tcus tool can do by adding more protocols to list. Top 3 on actively still researching and developing more protocols with large userbase are autotuner,flex,kess v3. Top3 at the moment is autotuner (new upcomer, this is the schools guy doing everyones homework and brags about it on the yard XD ) ,flex ( this is the surgeon, military grade advanced tactical swiss army knifetool ) and KESS3 (good old alientech, veteran of the old days when kess v2 was still the best money could obtain. Now with new hardware theyre not the alphadogs anymore and battle for place in the top 3 spot). Here comes the review from Mr. Jan Keskitalo- a professional ECU chip tuning master. So we start by checking out good and the bad on autotuner. Its a quick, reliable, good tool in dropping in files with quick turnaroundtimes on the garage. AutoTuner Think of it as an iPh...

  Problem: After the last update Magic Motorsport Flex programmer software won’t work. It says error 2, please reinstall the application. Does somebody have a solution? Solution: Unistal flex, delete folder flex on HD. Reinstall app you can find the installer on Google if you don’t have subscription. Turn off antivirus. Run as administrator. User report: I download from google. And reinstall. Now works good.