PCMtuner-tool

  Foxflash programmer will read and write VAG EDC16U1 ECU by OBD without problem. Many models were tested. 1). Audi a3 2.0 tdi ECU: EDC16U1 Read via OBD ok Write via OBD ok Checksum ok Hot start -fix-ok(solution) 2). VW Golf 5 edc16u1 read, write, checksum ok, Egr off,OBD mode 3). SEAT Altea EDC16U1 Read, write via OBD, checksum by fox flash Bench mode also works. www.iecutool.eu

 Here is the solution if you have a problem updating Foxflash Manage r to 1.4.1 or 1.4.2. Solution: Uninstall and download the Manager again. Download Foxflash Manager tool setup file from www.dfb-technology.com and install. For all who struggle with renewal 1: Uninstall Fox flash manager 2: Delete dfb technology folder in c:program 3: download an older version, you will find it on iecutool.eu. 4: we reinstall everything. www.iecutool.eu

 Foxflash manager new 1.4.2 version is available. What’s new in Foxflash Manager 1.4.2? 1.Fix network sll problem 2. Adds Simos 18 read/write password database. Delete old Foxflash manager, download and install Foxflash manager form https://www.dfb-technology.com/index If failed to update Foxflash Manager to 1.4.2, follow the solution here to fix the problem: http://www.pcmtuner.org/foxflash-1-4-1-1-4-2-update-error-solution/

 AUDI Q2 transmission cloning by Alientech KESS3 programmer successfully. Audi Q2 8U1 2016 TCU Temic DQ200G2 Protocol: 1625 Bench mode cloning ok. Need to have car/LCV bench mode activated.

 EDC17C60 Citroën C4 Picasso II 1.6 BlueHdi 120CV AdBlue off Read in bench OK. Write in bench OK. Checksum by foxflash OK. Fox works great need to use it right with the right files. www.iecutool.eu

  Problem: After downloading and setting up FormulaFlash software , I have a problem with the network. Error "Network Connection Failed". Any advice? Solution: Contact www.iecutool.eu to download driver for Formulaflash and install it. The problem will be resolved.

  Foxflash read and write DCM3.7 VAG ECU in jtag mode successfully. But Read file AS 2176 KO Need full backup read by foxflash. Need to remove the PCB from the chassis. It is hard to open but possible without any special tool just be patient and good hot air and hot it good near the connector and remove cover. You can also use heatgun and two flathead screwdrivers with steady hands OR opening tools. Foxflash will also read/write DCM3.7 via OBD. For example: VW Polo 1.2 TDI DCM3.7 OBD read and write No problem. Checksum Fox flash . www.iecutool.eu