PCMtuner-tool

  Foxflash new user feedback: Mini One 1.6 Gasoline Just get ECU Siemens EMS5150 not car Read ok with OTB 1.0 adapter Write ok with OTB 1.0 adapter E85 Checksum by WinOls All perfect. OBD on bench pinout is on the document.

  Foxflash failed to read Jeep 2021 EDC17C69 TC1793 ECU on bench. Error SK2 Bench locked. 2021 have tprot. Not possible read by aftermarket tools. Foxflash cannot read it as bench locked. Bench mode uses a security exploit in Firmware to gain access to bootloader on processor, after 2020 most manufacturers update ECU firmware so exploit no longer works.

  Problem: Foxflash reads Jaguar ECU Edc17cp11 with no problem, when write ECU it gave an error. Any idea? Solution: It says on the program, use higher voltage. 13volts minimum. That stock power dc not enough. Recommend buying lab power supply. www.iecutool.com

  Foxflash new feedback: Fiat marelli MJD 8F2 ECU. Read ID ok read bench ok write bench ok Checksum done by the mapper but Fox I'm doing it without worries I've done it several times.

  Foxflash new feedback: Peugeot DCM3.5 read and write ok. To read and write use the following driver DELPHI DCM3.5 — MPC5566 — Peugeot, Citroen, Ford pinout Solder the rainbow flat cable on the pcb: Solder the rainbow flat cable on the pcb: This is the way how the customer did it. www.iecutool.com

  Foxflash new feedback: Renault Trafic 2.0 dci 2012 EDC16C36 561/2 on Bench 13.5 Volts Terminal clamp 7 on the bench box read ok Write ok Stage 1 Foxflash pinout to EDC16C36

  Foxflash new feedback: Sid310 Nissan Read and write via obd. It is a 2017 nissan navarra 2.3. Write by OBD, takes 10 minutes. Checksum ok with foxflash. For Nissan/Renault SID310, better boot on it, it's better to open it. Read also: http://www.pcmtuner.org/foxflash-continental-sid310-obd-write-error-sk2/