PCMtuner-tool

  FoxFlash and New KT200 ecu programmer support MEDC17 free tricore clone service. Most of other tools need patch the files after read out, but Foxflash is free. How to Clone MEDC17 ECUs with FoxFlash? The following functions allow you to create a file for cloning Bosch MED/EDC 17 ECUs. Here is the procedure: 1. Read in BOOT MODE TRICORE or in BENCH TRICORE the car control unit (ECU 1) and the purchased control unit (ECU 2). Read both Micro [flash] and eeprom data separately. 2. Select the driver: ->TOOL BOOT ->TOOLS BOOT MODE -> INFINEON TRICORE Clone Service Choose ECU you desired to clone Here is the available list of ECU clone 3. Load on the first line the Micro file of the car control unit (ECU 1). Load on the second line the Micro file of the purchased control unit (ECU 2): 4. Click CLONE & SAVE and the software will save the file for the clone in the selected directory. 5. Write in BOOT MODE or the file just created on t...

  Problem: Foxflash ecu programmer wrote PSA EDC17C60 mod without checksum (forgot it patches tprot) car didn't start. Wrote back the original file with automatic checksum by Foxflash. Still doesn't start. Write original file, when asked me to want foxflash to calculate the checksum click NO, still same issue, Any solution? Feedback & Solution: Issue solved. Basically, eeprom was the culprit. Read eeprom again and compare with original eeprom read. When you write file without tprot off you need to rewrite the original eeprom and flash. Then write mod file preferably with manual tprot off and manual checksum and skip request by foxflash .

 For those stressing out about your registration of pcmtuner . Sometimes it can take a few days to get your software licences and tool activated. For those wanting to use the tool right away here is the simple quick start guide. 1. Download the PCMsuite from https://www.tuner-box.com/ and install your hardware and Dongle driver. 2. Download PCMflash 1.20 from here (but do not update the software. NEVER UPDATE PCM FLASH!) https://www.mediafire.com/…/jqopvtew…/PCM_Setup.rar/file 3. If you need to find wiring diagrams, you can use the online version of the pcmtuner app here:- https://www.tuner-box.com/tunerapp/initiate.php?mid= 4. Module details and other diagrams etc are also in the attachment section of our website www.iecutool.com

 Car Porsche Cayenne V6 3.0 TDi 262Hp (193 kW) Year 2015 ECU Bosch MDC17CP44 Olny Wire Bench (do not open cover). Original: Serie 262Hp PcmTuner bench read and Write successfully using Protocols Module71 Bosch MEDC17: TC1797 (Backup Flash,Eeprom). DTC REMOVE: P2196 Lambda OFF. Auto-Checksum with pcm tuner Diagnostic Machine –> Check DTC: No Error. Start. Car goes well. pcmtuner edc17cp44 pinout Lambda OFF

  Problem: I failed to read and write Fiat Marelli MJD 6JF ECU with your new KT200 (KTM200) ecu programmer on bench. Wiring is the same as the document. How to fix it?Images attached: Solution: KT200 will read and write Marelli 6f3 full system, read eeprom too. You've got 2 pinouts. Try another one if one does not work. It is fine with original power supply (12V). ALSO DON'T CONNECT BENCH BOX WHEN READ THIS ECU. You can also read and write via OBD if there are VR files available. But bench mode is faster than OBD VR reading.

  PCMTuner read and write Renault Master 2.3 dci 2016 sid310 ecu via obd module 59 successfully. Checksum by pcm tuner. Adblue off with swiftec software. 2016 model don't need to read password. With pcmtuner no need read password, with some other tool yes. some sid 310 after 2020 you need to read it. see pcmtuner sid310 boot pin Read also: http://www.pcmtuner.org/pcmtuner-read-write-renault-clio-4-sid310-ecu/

  Foxflash ecu master tool read and write Jeep Cherokee TCU ZF 9HP transmission gearbox TCU successfully. ZF 9HP — FCA-FIAT/JEEP/CHRYSLER Pinout to Foxflash Set up 9HP gearbox with fox flash in BDM Select driver Jeep Gear->Cherokee->ZF 9HP48 TC1782 Boot Tricore Read all (full flash and eeprom) in boot.