PCMtuner-tool

 SID208 PSA can all be done with pcmtuner module 60 . Follow instructions here: 1. Read password directly in the car via OBD and safe. 2. Open ecu and according to the scheme two resistors solder 1 k-ohm. 3. Then read in BSL mode and unlock ecu. 4. Desolder resistors and mount ecu in the car, then write in normal mode PCMTuner PSA SID208 Boot Pinout Ford PSA SID208 SID209 BSL Guide with PCMTuner

 Question: Mazda CX-5 2.2 diesel 2018, 150HP …can read with PCMTuner ? I don't see any info in the instructions. Solution: It reads via OBD. OBD does not have instructions. Find your OBD port. And read with pcm tuner via module 10. Also if starline alarm fitted disconnect alarm module behind dash. If your ecu is on table and not in car, then as the tuner you will have to find correct pinouts. http://www.pcmtuner.org/pcmtuner-mazda-denso-ecu-pinout-obd-and-bench/ http://www.pcmtuner.org/pcmtuner-mazda-rf7n-ecu-pinout/

  Fetrotech tool (Silver) read and write 2018 Peugeot 5008 MD1CS003 ecu successfully. 2018 — Peugeot 5008 1.5 BlueHDi 130HP MD1CS003 — Read/Write and do checksum. Very fast. Amazing.

 Nissan qashqai 2013 Edc17c42 Dtc off Read and write with pcmtuner without problem. Using external Laboratory power supply, 12.4v. select the module 71 TC1767 for read flash and eeprom. pcmtuner app will show you wiring diagram and instructions.

 Hyundai Tucson 2.0 CRDI 2006 EDC16C39 ecu read ok with fetrotech tool very fast. Hyundai Chevrolet EDC16C39 pinout Fetrotech read and write without problem

 Honda EDC17C58 read and write with pcmtuner Bench module 71 successfully. DPF OFF + EGR OFF (Flash + Eeprom backup) Pcmtuner pinout Honda EDC17C58

  Question: I try to write a modified file on pcmtuner module 71 and ask me to confirm the checksum. Normally it said in the module 71 can do flash checksum. But why is ask for continue if the checksum is not correct? Good file blue symbol and Yellow modified file. Solution: "Checksum is correct."= checksum was ok "Checksum was corrected." = the other wasnt so software corrected it. pcmtuner flash corrected the checksum and you can procceed. Press OK to correct checksum. One checksum was ok, the other wasnt so software corrected it. When software is modified always it needs to fix checksum. If you write the original no need to fix checksum!