PCMtuner-tool

 Can Formulaflash perform VAG Simos PCR2.1 unlock? It cannot unlock OTP. But it can do pcr2.1 on bench without unlocking. Read on bench ok. Write on bench ok. Write EEPROM back to be unlocked. Checksum correction with formulaflash. Works like a charm. What’s the procedure: Read eeprom, write eeprom for unlock and read ALL, easy.

  Question: It’s a Peugeot Partner 1.5 132hp with Bosch MD1CS003 ECU. Car build date is 2020/06. Try to read this ECU with Flex programmer. How do i know if ecu needs to be boot glitched or not? Is there any danger of trying to connect and reading on non locked protocol if ecu requires boot glitch? Here is the clue. How to determine whether the MD1CS003 ECU is locked or not? Way 1: Just try normal bench read and you will know if its blocked. If locked then flex tell you. Way 2: Check the ECU label. If 0281 034, 035 or 036 it’s not locked. Also, 0281 037 101 not locked. If more than "037" is locked. FYI: How to determine the TPROT lock status of PSA MD1CS003: It can be quickly determined based on the part number. Part numbers starting with 3XX indicate not locked; those starting with 4XX or 5XX indicate a locked state, requiring an unlocking operation before normal data reading and writing can be performed.

 FORD DURATEC RELEASE: Continental EMS210x ECUs go live via 100% OBD! A practical software update targeting Ford’s naturally aspirated petrol engines is now live on your equipment! Continental EMS2101, EMS2102, EMS2103, and EMS2106 ECUs are now officially supported via 100% OBD on your AutoTuner Tool . Take full engine management control over Ford Fiesta 1.25i / 1.6i, Mondeo 1.6i and B-Max 1.4i platforms on your AutoTuner Tool! The Continental EMS2101, EMS2102, EMS2103 & EMS2106 ECU series is now supported directly through the diagnostic port. Supported Lineup (Continental EMS2101, EMS2102, EMS2103, EMS2106): Ford B-Max (2011): 1.4i 16v Ford Fiesta (2008–2013): 1.25i Duratec 16v, 1.6i Ti-VCT Ford Mondeo (2007): 1.6i Ti-VCT Update your AutoTuner software today and expand your calibration services on Ford platforms! Key Features Type: Engine Control Unit (ECU) Mode: OBD NR Readout: Calibration MCU: C167 Read time: 10sec Write time: 15sec Checksums correction

 Read and write BMW G30 530xd 2018 Bosch MD1CP002 ECU with Foxflash programmer successfully. ECU: MD1CP002 Stage1 Read-bench Write-bench Checksum manually. Foxflash works with md1/mg1 till 06/2020. Till 2021 may after this date all are locked by BOSCH. You need Flex/KESS3/OBDSTAR etc.

Dimsport The Genius universal ECU programmer released new Bosch MDG1 Bench solution for BMW and MINI! Dimsport expands Bosch MDG1 coverage with a new Bench solution for several ECUs on BMW and MINI vehicles. With The Genius, you can access the ECU content and perform programming directly in Bench mode, without opening the ECU. Supported ECUs: MD1CP032 — TC299 MD1CS001 — TC298 MG1CS024 — TC298 MG1CS049 — TC298 MG1CS201 — TC298 Faster, more direct, non-invasive work on BMW group’s Bosch MD1/MG1 engine management systems. Connection: BENCH Brands involved: BMW, Mini, Alpina

 Read and write Audi A6 diesel 2.0 TDI Bosch EDC16U31 ECU successfully with Xhorse Multi Prog . Read ext eeprom, ext flash & int flash ok, write ok. Bench mode. EGR DPF off. Checksum correction with multiprog. Did the same ECU with KT200 II latest month. KT200 does bad checksum on this ECU. Write unsuccessfully !! Stop 90% ecu bricked. Multi prog has no problem. All ok car starting.

  FormulaFlash read and write DC4 (Getrag) gearbox on bench successfully. Renault Captur 1.2 — DC4 (Getrag) TCU read before attempt to repair — OK. Read eeprom & flash ok. Write eeprom & flash ok. Bench mode.