PCMtuner-tool

 Question: I want to read and write a BMS module from Smart 451 EV. Is it possible with foxflash ? Answer: Foxflash programmer will read and write Smart EV BMS T1 module on bench. BOSCH BMS T1 [ 1797 ] — SMART EV [ BMS ] Connect the multifunction cable as follows, use the Bench Box: To read and write use the following driver: → BENCH TRICORE → SMART → TC1797 — SMART → BMS T1 ECU tool recommendation: PCMtuner https://www.iecutool.com/wholesale/pcmtuner-ecu-programmer-tool.html

  Problem: Mercedes CDR2 foxflash reading performed OBD. Writing presents an error and presents a message to contact support. what is the solution? Solution 1: CRD2.10 etc is problematic with OBD, you can do JTAG. DELPHI CRD2.10 Solenoid — MPC5566 pinout to foxflash Connect the multifunction cable as follows: Solder 3 links on the pcb Solder the rainbow flat cable on the pcb: To read and write use the following driver: Solution 2: Write with kess v2 will work without problems at this ecu. Read also: http://www.pcmtuner.org/foxflash-mercedes-delphi-crd-2-20-not-start-solution/

  PCMTuner new user report: Read and Write Dacia Lodgy 2017 SID310 via OBD successfully. "Dacia lodgy 1,5dci 2017 110cv SID310 module 59 reading/writing stage 1 -> OBD Checksum ok by pcm tuner. I've done quite a few cars with this tool. Ain't had no issue at all." Image attached: ECU tool recommendation: PCMtuner https://www.iecutool.com/wholesale/pcmtuner-ecu-programmer-tool.html

  Problem: I'm reading Ford SID208 with foxflash via obd but communication failed. Is this not possible via obd? Or i have to open ecu to read it? Its Ford ranger 3.2L 2018. Solution: Silent key is Locked ECU by immobilser. You need to do ecu boot Tricore. Fox flash read and write Ford SID208 in boot mode. SIEMENS CONTINENTAL SID208 [ TC1797 INT.F.] — Ford Step 1: Read and Write ECU Connect with the multifunction cable the following pinout and the boot shown below Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1797 ATTENTION: If the password error message appears at the beginning of the reading, proceed as follows: Step 2: Password Search Disable boot mode by removing all connections on the pcb. Connect the pinout below (red wire +12V instead of green igniction). Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD SID208 FORD — LAND ROVER → Click on "Find Password" and follow the software messages. At...

  Problem: My foxflash software is not working on Win7 32bit, network connection is fine. Error unable to connect server and insufficient memory. Any advice? Solution: Win7 missing patch for foxflash. Better install software on Windows 10 64bit system. Also make sure your computer has 4GB+ RAM storage. If got this error when installing foxflash manager, change system to Win10 as well. ECU tool recommendation: PCMtuner https://www.iecutool.com/wholesale/pcmtuner-ecu-programmer-tool.html

  Question: Temic full system Mercedes foxflash gives the id but no longer reads the ECU. Any advice? Solution: DON'T CONNECT BENCH BOX WHEN READ THIS ECU. ECU tool recommendation: PCMtuner https://www.iecutool.com/wholesale/pcmtuner-ecu-programmer-tool.html

  Foxflash ecu programmer released new update-adding Bench/Boot protocol for Isuzu EDC17C83. May 23, 2023 update May can't get any better as we release a new exclusive protocol today! In this update, you'll find the BENCH protocol for Isuzu EDC17C83. Supported Control Units & Vehicles ECU: Bosch EDC17C83 TC1793 Supported Vehicles: Isuzu Dmax 2017–2022 1.9D 164cv Isuzu Dmax Rodeo 2017–2022 1.9D 164cv Isuzu M21 2017–2022 1.9D 123cv BENCH read is real. R/W time: ~6 minutes at first programming, then ~ 30s. ATTENTION: Some of the latest vehicles might have a secure gateway. Update method: Run the foxFlash Manager software, and click the download button till all is done. Foxflash pinout to BOSCH EDC17 C83 [ 1793 ] — Isuzu [Diesel] Bench Mode To read and write use the following driver: → BENCH TRICORE → ISUZU → TC1793 — ISUZU → EDC17 C83 Foxflash Boot Mode Pinout to BOSCH EDC17 C83 [ TC1793 INT.F.] — Isuzu Read and write ECU Connect with the multifun...