PCMtuner-tool

 Did anyone test Fiat FCA Marelli MJD9F ECU with Foxflash ecu programmer ? Yes, both OBD and Bench mode work fine. OBD mode: OK Read and write over obd works good. Magneti marelli 9df reading two hours, write 5 minutes. Bench mode: OK On bench much faster read it on bench, 87 minutes MARELLI 9DF — Fiat, Alfa Romeo, Lancia [Diesel] Bench Pinout for Fox Flash

 I just received my foxflash but after activation I can't download I have this error. Solution: First of all, make sure your email address is correct. If you have problems downloading update/documents within FoxFlash manager app i.e. it stops midway, try install the following patches dependant on your windows environment. For both Win7 32bit and 64bit. Win7 patches Windows6.1-KB2992611-x86.msu

 Question: I have installed Foxflash software but not connect. Why is the Foxflash select driver not activating? Solution: 1.Open FoxFlash Manager 2. Click Active 3. DO NOT CLOSE MANAGER 4. Open Foxflash and enter device serial numer and make sure internet is connected! 5. Tool must be connected and powered via 12v. You can bench power supply or OBD cable, but tool doesn't work without power. https://www.iecutool.com/service/foxflash-cannot-select-driver-solution.html

 The new KT200 full version ecu/tcu programmer is based on KTSuite Manager app. Software requires activation before use. How to Download, Install and Activate new KT200 KTSuit ? A: Connect your KT200 KTsuit with USB cable to laptop B: laptop or PC must connect to internet Step 1 : go to www.ktmtool.com website download the software KTSuit, and install the package. Step 2 :Check the SN where tie on your box backside Notice: Don't release that SN to anyone, it's a safe code for you, don't let any third party or guys know that code or it easy to let your tools lock. Step 3 :Send that SN to email:info@ktmtool.com for active and link your tool to your email. (Your tool will be locked if you don't send to active) Step 4: Run the ktsuit manager, and register it with your email, then input the sn active your account, don't close the ktsuit manager before your run ktsuit, always keep click the Active button before you run the ktsuit software. Step 5 : i

  Pcmtuner handled this Hyundai Kefico ME 17.9.1 nicely. Once I removed the shorted circuit from the original module. Was able to do a full read & write into the used donor. Module was plug & play on this 2008 Hyundai Genesis, didn't have to reset the smart either. With boot module 53.

 Some users reported that their pcmtuner was working fine on Win7 but an error "Object reference not set to an instance of an object" occurred after update system. Here's the working solution from iecutool.com and our customers. It's a problem with windows last update. Solution 1: Try restore windows. Your windows done an update, try do roll back to previous. Solution 2: If don't work install your PC with system update no more than 2019. Solution 3: Customer solution. No restoration!!! No any reinstall. Go to Control Panel -> Programs and feature Find Microsoft Edge WebView2 Runtime Uninstall Microsoft Edge WebView2 Runtime Disconnect internet Install the old version edge web view in link mega. https://mega.nz/file/pw5jlITC#eh_9qxgoIxkl7KUlonJliCdCcFpO2qveCw2Oqbyt6Mw pcmtuner 1.2.7 now is working fine.

 Here is the demonstration of unlocking a VAG Simos PCR2.1 ECU with Foxflash programmer in bench mode, unlocking allows all future programming to be done through OBD as well. FoxFlash PCR2.1 Unlock in bench mode PCR2.1 Unlock bench mode pinout To read and write use the following driver: → BENCH MODE → VW / AUDI / SEAT / SKODA → TC1796 — VAG → SIMOS PCR2.1 1. Unlock eeprom. 2. Read/Modify/Write flash. 3. Checksum Fox flash