PCMtuner-tool

  Problem: Hi. Fetrotech tool has Error key. What is the problem? Follow all step by step to install the new Fetrotech software. Key install already. Any solution? Solution: The error key was caused by the wrong activation key input. Double-check if the key file inputted is correct, then replace the file again. Copy and paste FEkey.txt file to desktop. DON'T CHANGE ITS NAME. Open FEkey.ext input the SN on your device's backside (uppercase letter), and save it. Don't change the file name, don't change anything, don't use space. Don't delete the FEkey.txt file, otherwise, the software will refuse to open. Check Fetrotech software new installation guide http://www.pcmtuner.org/free-download-fetrotech-tool-patch/ www.iecutool.com

  Question: I cannot see EDC17C74 in foxflash driver list , only EDC17CP74, the question is whether it can be used to write EDC17CP74? Answer: EDC17C74 driver is there. To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN / AUDI / SEAT / SKODA → TC1793 — VAG → EDC17 C74 Foxflash pinout to VAG EDC17C74 ECU BOSCH EDC17 C74 [ 1793 ] — VW, Audi, Seat, Skoda [Diesel] Connect the multifunction cable as follows: Attention: On some EDC17C74 the CAN line is shifted. If with the previous pinout doesn't enter in bench tricore mode, then try again by connecting it as follows: www.iecutool.com

 Possible to read and write Renault Simens SIM32 with foxflash ? by OBD, bench or jtag? Yes, foxflash will read and write SIM32 (if it is not encrypted), both OBD and jtag. No bench. OBD mode: tested working. for example, E85 solution on Renault Twingo 1.2: Ecu Siemens Sim 32 Read & Write ok in OBD. Jtag mode: Siemens SIM 32 — Renault Boot pin to Foxflash Kit to use: – Multifunction cable – Flat cable – 1 resistance 320Ω Connect multifunction cable as follows: To READ the ECU solder the rainbow flat cable. Use the driver: → BDM / JTAG MODE → JTAG RENESAS → AUD SH xxxxx To WRITE the ECU connect the white, violet and bicolor grey/red of the multifunction cable, and solder a resistance 320Ω. Use the following driver: → TOOL BOOT → RENESAS → SH xxxxx BOOT MODE www.iecutool.com

  Problem: I failed to download foxflash software . Error " unhandled exception in the application. If you click Continue. The application ignores this error and attempts to continue. If you click Exit. the application will close immediately. could not read block-no datal." Server is down? Solution: Your operating system is missing patch and .net framework. Download and install patch and net framework online (google search). If the same issue still occurs after installing patch and framework, you might need to change another computer (better Win10 64bit.) www.iecutool.com

  Problem: I was trying to read JCB Dcu17cv51 ECU with foxflash . it is in the manuals section, but under jcb tc1724 is not listed. Anyone had to deal with this before? Solution: You can find JCB Dcu17cv51 in boot mode. Connect with the multifunction cable the following pinout and the boot shown below. Bosch DCU17CV51 TC1724 JCB adblue pinout to foxflash Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1724 www.iecutool.com

 If your foxflash or new KT200 software crashes when read and write ECU, restart software still same thing happens, you have to enable Administrator elevated Privileges Windows 10. How to Enable Elevated Privileges in Windows 10? Press win+R to run Command, input: gpedit.msc Go to Local Computer Policy->Windows settings->Security Settings->Local Policies In the right pane you will see a setting User Account Control: Turn on Admin Approval Mode. Double-click on it and select Disabled . Find also User Account Control: Admin approval mode for built-in admin accounts . Double-click on it and select Disabled . After enabling the highest administrator privileges, restart computer, then read and write ECU with foxflash again. https://www.iecutool.com/service/solve-foxflash-software-crashes-when-read-ecu.html

 Will foxflash read and write PSA edc16c3 ecu? on bench or by BDM mode? Bench mode: BOSCH EDC16 C3 [ MPC556 ] — Citroen, Peugeot [Diesel] Connect the multifunction cable as follows, use the Bench Box: Set the resistance of 1000 ohms that starts from the bench to the brown wire and after mounting the brown on the ECU To read and write use the following driver: → BENCH MODE → [brand] → MPC555/6 — [brand] → EDC16 C3 If failed to read it on bench, read it by BDM. Foxflash BDM mode is not a problem. Here is the BDM setup example: