Posts

Showing posts from January, 2023

PCMTuner Read and Write VW Polo 1.2L DCM3.7 via OBD

Image
 Car: Volkswagen Polo 1.2L TDi 75Hp ECU: Delphi DCM 3.7 PCMTuner read and write via OBD, only wire OBD, no need to remove ECU and do not open cover. Serie 75Hp @ Stage2 115Hp (+40) + Vmax Remove DTC DPF-OFF + EGR-OFF ok. wire disconnect unplug EGR PCM Tuner OBD read and write with Protocols Module54 Vag 1.2L DCM3.7 Auto checksum. Car starts. Car goes well. Image attached:

Foxflash Read VW MED9.1 ECU on Bench

Image
  Foxflash ecu programmer read and write VW MED 9.1 ecu successfully on bench mode.extFlash + eeprom read and write OK. Pinout BOSCH MED9.1 [ MPC561/2 ] — Audi, Vw, Seat, Skoda [Gasoline] To read and write use the following driver: -BENCH MODE – [brand] – MPC561/2 — Vag -MED9.1 Read extFlash Read eeprom Write Flash Write eeprom You need write everything with foxflash separately for clone ecu, if need time, just use flash or external flash which have maps will be ok.

Foxflash Updates BMW MSV90 Boot and DCM6.2A

 Good news for both new and old Foxflash ecu programmer users, there are some new updates in January, 2023. Just a note and reminder, any software updates will be done automatically when ready. FOXFLASH WILL AUTO UPDATE WHEN READY!!! Just connect your tool and keep internet connect , open the manager and foxflash , it will auto update to your local. When you are online, the update will auto sync from the server to your side. January 16, 2023 FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET – Complete reading and writing of Micro, – Complete reading and writing of EEPROM, – Cloning, – RIVERGIN function January 20, 2023 – BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782 With this update you will be able to fully read and write the following ECUs directly from pinout without having to open them: – VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25 – FORD: MED17.0.7 – NISSAN: EDC17 C84 – RENAULT: ME17.9.20, EDC17 C84 – TOYOTA: MED17.9.52, EDC17 C47 26 ...

FoxFlash Read and Write Volvo Denso MB279700-9xxx

Image
 Foxflash Volvo Denso MB279700–9xxx works perfectly, just follow the steps of foxflash , reading, unlocking, and writing all done on the bench. PROCEDURE: 1 — Read the Ecu AND unlock the Ecu 2 — Write the ECU READING AND UNLOCKING: Connect the following pinout using the multifunction cable. Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit. WRITING: Now it will be possible to reconnect the control unit to the car and write the modified file via OBD. Use the following driver: CAR > VOLVO > Model >2.0 DENSO MB279700 9641 SH72546R CAN Alternatively, you can WRITE also the ECU on the table using the pinout on the next page. Note: Compared to the read pinout, the CAN line is moved. FOXFLASH PINOUT FOR WRITING: Just follow the foxflash instructions: read file 15 min, unl...

Foxflash "Unable to Connect to Server" Solution

Image
  Problem: My foxflash software is not working on Win7 operating system, unable to connect to server. Any solution? Solution: Operating system issue. Your current system is in conflict with Foxflash app. Better install software on Windows 10 64bit.

FoxFlash Application Unable to Start Solution

Image
  Problem: I got the foxflash software installed but failed to start Foxflash Manager app. Error "The application was unable to start correctly" Solution: Missing patch on Windows 7 system. following patches dependant on your windows environment. For both Win7 32bit and 64bit. Win7 patches Windows6.1-KB2992611-x86.msu

How to Reinstall PCMTuner Software if Change Operating System?

Image
 How to reinstall PCMTuner setup after changing the operating system (Win10 Pro)? Solution: if not change harddrive old keys should work, but if you just want to use pcm tuner tool then follow guide below. Sometimes it can take a few days to get your software licences and tool activated. For those wanting to use the tool right away here is my simple quick start guide. Download the PCMsuite from https://www.tuner-box.com/ and install your hardware and Dongle driver. Download PCMflash 1.20 from here (but do not update the software!) PCM Setup If you need to find wiring diagrams, you can use the online version of the pcmtuner app here: https://www.tuner-box.com/tunerapp/initiate.php?mid&fbclid=IwAR39VDKOV3qzYJxm1QvHIXs2dAPrmsnJWOxEehuYD1SJYHGM9G-HwF_PSlY Module details and other diagrams etc are also in iecutool.com blog here.

FoxFlash No Option to Read Mercedes Edc16c32 EEPROM?

Image
  Problem: I'm trying to read for the first time a Smart Edc16c32 with foxflash but i don't have an option to read eeprom and i need to clone the ecu. Can anyone help me? Solution: Mercedes/Smart Edc16c32 do not have Eeprom, they have what is known as an Emulated Eprom (in flash memory). only need to copy ext flash to new ecu. also don't forget to save the current file of the new ecu , if the software of donor ecu isn't compatible it will not work.

Can I use Ktag BDM Adapters for Foxflash?

Image
  Question: do you use bdm adapters from ktag fg? adapters from ktag are not compatible? If we can change the bdm adapters to avoid welding. Can ktag bdms be used with bdm support? Where are there other bdm without soldering for foxflash ? Answer: just wait us, iecutool.com is releasing foxflash BDM adapters soon. You can purchase from 3rd parties, must be Dfox compatible, usually around $130 each. BDM Adapters — The tool cannot use generic adapters such as the cheap Ktag type. It can only use Adapters that are designed for the following Ori products — Dfox, EVC BDM100, FG_TECH, AMT-BDM, Ori. Ktag other types will damage your ecu/equipment.

How to Use Fetrotech ECU Extractor to Open ECU Cover?

Image
  What's Fetrotech SEIKOTOOL ECU Extractor ? Fetrotech seikotool ECU cover extractor is designed for ECU worker and chiptuner. It helps to remove/ install car ECU module cover easily. Fetrotech seikotool ECU cover extractor is a useful tool for opening the ECU. Fetrotech seikotool ECU cover extractor works perfectly with ECU tunning tools MPM , Fetrotech , PCMTuner , Foxflash , Autotuner, Kess v2, Kess v3, Dfox, Bitbox and much more. We need to use four or six at a time based on the type of ECU. Fetrotech seikotool ECU cover extractor must be fixed in the place where the screws on the control unit are unscrewed to allow the user to remove the cover without damaging or deforming it. It is a nice tool that every tuners should have. What's the advantages of Fetrotech vs other ECU openers? 1). Fetrotech ECU remover is solid made, not easy to break. 2). Fetrotech ecu extractor is easy to use How to Use Fetrotech ECU remover to Open ECU Cover? Step one: Unscrew t...

FoxFlash Failed to Read BMW EDC17CP02 Solution

Image
 If failed to read and write BMW EDC17CP02 ECU with Foxflash programmer , here is the solution. Solution: Repin ecu with alternate pinout (2 types), switch OFF MFC until commanded by software to switch on…the message is just an instruction. This bench pinout was tested working fine. Feedback: Bmw Edc17cp02 or c06/cp06 read on bench dpf off write Checksum is done with fox flash. In my case pinout for bench in foxflash doesnt work. I used pinout above.

Foxflash WV POLO PCR2.1 Unlock by OBD

Image
  Foxflash read WV POLO 1.6TDI 105 ECU PCR2.1 VR files via OBD, EGR Off, Checksum automatically. Write with OBD. ECU unlock by VR flash automatic. Read file, Write file, when write ECU will be unlocked. Attention: Read manual file for flashing by obd, need disconnect battery and etc. Vehicle start without problem. Working Fine.

Foxflash "Value is Not Valid" Error Solution

Image
  Problem: I just received my Foxflash programmer today. and i have already installed the program on windows 10. But this problem happened to me. Can anyone help me with this problem? Error Valud of 25/9/2022 is not valid for "Value". Cannot select driver. Solution: This is a software installation error. Windows date&time make sure automatic is not active. I would delete old software folder, and reintsall software with all antivirus disabled. Also make sure Microsoft C redistributable is installed. Feedback: Thank you. The foxflash software program is working now.

FoxFlash Read and Write Fiat Freemont EDC17C49 on Bench

Image
I need to do a Fiat Freemont with EDC17C49 EGR off. It is done by foxflash on windows 10 ssd 16gb ram. Read (5 minute) write(50 seconds) checksum (lsuite) There are 4 connection modes for EDC17C49. If it does not enter bench mode, add ground to pin 44: On some EDC17C49 FCA the CAN line is shifted. If with the previous pinout doesn't enter in bench mode, then try again by connecting it as follows: Fox flash read in 5 minutes, write 50 seconds and checksum with lsuite.