PCMtuner-tool

 Porsche "Modern Classics" via OBD! Big update for the Porsche lovers! Autotuner programmer now supports Siemens SDI3 & SDI4 ECUs directly via the OBD port. Supported Vehicles: Porsche 911 (997) , Porsche Boxster / Cayman (987) , Porsche Cayenne / Panamera (V8 4.) It is time to revisit the legends! We are pleased to announce the support for Siemens SDI3 & SDI4 ECUs via the diagnostic port. You can now tune a massive range of "Modern Classic" Porsches, from the agility of the Boxster to the power of the Cayenne V8. Supported Models: Porsche 911 (997): 3.6 & 3.8 (Carrera, Turbo, S, GTS) Porsche Boxster / Cayman (987): 2.9, 3.4 (S, R) Porsche Cayenne & Panamera: 4.8 V8 (GTS, Turbo, Turbo S) Method: These protocols are available in OBD Normal Read (NR). This allows you to perform a real read of the ECU. This is the perfect method to check if these older vehicles have been previously tuned! Key Features Type: Engine Control Unit (ECU) Mo...

  Problem: My CG FC200 programmer says the software has expired. But it is 1 month old only. What’s wrong? Solution: Weak internet connection. Need to change the server area. Go to Setting-change server and try again. Report: Solved, China server changed from usa.

 Tune the Legend: Bugatti W16 is ready! The pinnacle of performance is now supported on your AutoTuner Tool . We have added the Bosch MED17.1.12 protocol for Bugatti. Supported Hypercars (8.0L W16): Bugatti Chiron, Bugatti Divo, Bugatti La Voiture Noire Method: Bench Normal Read (NR) Access the real ECU data directly on the bench! Key Features: Type: Engine Control Unit (ECU) Mode: BENCH NR MCU: TC1793 Read time: 1 min Write time: 30 sec Checksums correction Backup creation Compatibility List*: Models: Chiron — 2019 / Divo — 2019 / La voiture noire — 2020 Engine: 8.0-W16 *The list of vehicles may evolve over time. People who don’t deal with customers like this will never understand the value and will start hating. This protocol — and many other hypercars is extremely important. The tools perform perfectly and are made for everything hypercars and non-hypercars alike.  

  Problem: VW Golf R DQ250F. Was writing mod file and Autotuner software gave an error now can’t ID or write (same data transfer failed error). Car is not starting and P light flashing on gearbox. Any solution? Solution: If fail write, never turn ignition off, try again write the modified file, if again fails, than is problem in modified file, and write original file. Always hit write again straight after. When you have such errors by writing a modified file, never turn off the ignition. With the ignition cycling it uses the newer corrupted flash to start and that was it. The ECU is now bricked, and needs to recover it. Flex with frf over OBD or dimsport recovery over OBD, Kess recovery or flash with Odis engenering and frf file!! PCM flash is also very good at recovering in Bench mode. www.iecutool.eu

 FormulaFlash ECU programmer released new software version 1.1.0.0 in January 2026. FormulaFlash V1.1.0.0: UPGRADE DETAILS NEW PROTOCOLS ADDED Denso 3rd generation Toyota Auris 2019–2021 DENSO GEN3 Toyota Avalon 2018–2021 DENSO GEN3 Toyota CH-R 2019–2022 DENSO GEN3 Toyota Camry 2018–2021 DENSO GEN3 Toyota Corolla 2019–2022 DENSO GEN3 Toyota Crown 2019–2022 DENSO GEN3 Toyota Harrier 2018–2022 DENSO GEN3 Toyota Highlander 2019–2022 DENSO GEN3 Toyota Hilux/Vigo (8th) 2020–2022 DENSO GEN3 Toyota Innova 2016–2020 DENSO GEN3 Toyota Kluger 2019–2022 DENSO GEN3 Toyota Land Cruiser 2020–2022 DENSO GEN3 Toyota Levin 2019–2021 DENSO GEN3 Toyota RAV4 2019–2021 DENSO GEN3 Toyota Venza 2020–2022 DENSO GEN3 Toyota Yaris 2018–2022 DENSO GEN3 Read, write and checksum correction without disassembly or external adapters. Toyota Gen II and Gen I ECUs coming soon. AC Delco ACDELCO T87A (TCM), SPC564A BENCH read/write, ACDELCO T87 (TCM), SPC564A BENCH read/write, ACDELCO E82 BOOT ...

 How to replace Mercedes-Benz W212 DSM A0002703452 (FBS4) with Launch X431 ECU & TCU programmer on bench? Quick search DSM, choose DSM and Bench mode. Check wiring diagram. Connect DSM FBS4 with Launch X431 ECU programmer according to the diagram. Read module information Read EEPROM data Read and save original data. After reading data, exit directly and replace the donor Gearbox that needs to be replaced. Connect the donor Gearbox with Launch X431 ECU programmer . Read module information and read eeprom for the donor gearbox to back up data. Select Personalization. Upload the original gearbox eeprom data and personalize data. Persianization successful. New gearbox needs to be programmed to start. Use MB star device for programming and coding. www.iecutool.eu

  Problem: Still having issues with autotuner , it stuck on reading ECU page and crashed. maybe someone been through this? Solution: Delete Autotuner, re-install software and try new USB cable.