PCMtuner-tool

  FormulaFlash ECU TCU programmer released new software version 1.0.06 on September 27th, 2024. We are thrilled to announce the release of Version 1.0.0.6, packed with powerful new features and optimizations that take your ECU tool to the next level. What’s New? 1. Expanded Engine Support Unlock more potential with our expanded support for DELCO series ECUs (E37, E39, E39A, E67, E78, E87, E98, E92, E80, E83). This includes complete bench and OBD reading/writing for both PFLASH and DFLASH, offering you greater flexibility and control. 2. One-Click IMMO OFF for DELCO E83 Enjoy the convenience of a one-click IMMO OFF solution for DELCO E83 ECUs, available through both OBD and Bench modes. Simplifying immobilizer removal has never been easier. 3. New Model Compatibility We’ve added boot reading/writing for FLASH/EEPROM on DCM7.1AP ECUs, covering popular models from Dong Feng, Force, Great Wall, Hyundai, Kia, and Mahindra. Expand your reach with these new capabilities. 4.

 People still wondering what’s up since they cannot read this and that DSG (DQ200, DQ250 etc) with foxflash . We’ve done lots of dsg with just foxflash no other tool needed. Foxflash reads them just fine, you need either old godiag gt105+gt107 OR just newer model Godiag GT107+ in case failed to read these DSG gearbox TCUs on bench. Once again proven that more the tools, better the support. With FoxFlash [or with any programmer ] we can recommend getting GODIAG GT100 Diagtable (+ gpt boot addon ) + GT107+ (or gt105+gt107) to provide best ways on connecting to different ecu/tcu. Also usable on kess v2 and pcmflash for dsgs and so on. Where to get bench pinout for Foxflah+ Godiag GT107+? Pinout to DQ200 0AM/0CW gearbox Pinout to DQ250 02E/0D9 gearbox We got some other ECU/TCU bench and GPT pinouts for Godiag GPT/GT107 adapters, contact www.iecutool.eu customer service if interested.

  Foxflash read and write Ford Ranger 2013 2.2 SID208 ECU via OTB adapter successfully. SID208 OTB PW Ranger 2013 2.2 150 PS EGR+DPF Off Read/Write/Checksum correction by foxflash. Bench not possible for SID208 with Foxflash only OBD Boot and OTB. otb, as in on the bench. you can use all obd protocols ff has but in bench connection way. Just a hint Godiags gt100 diagtable does the same with gpt addon.

  FormulaFlash read and write PSA Bosch MEV17.4 ECU on bench successfully. Read eeprom ok Read flash ok Write eeprom ok Write Flash ok Checksum correction by Formula Flash. www.iecutool.eu

 It is a Ssangyong 2020 car, redbull killed it, it came on a trailer, it couldn’t be started anymore. ECU is delphi dcm6.2ap. Foxflash boot mode with bench box not ok, cannot communicate. But with obd cable and godiag boot adapter working fine. Godiag tools, on their webpage is most info and rest you have to dig around but i can say gt100 + gpt addon is a excellent purchase.

 It is a Ford Ranger 2.2 year 2018 with SID209 ECU. Foxflash read ID via OBD, read data via OBD, write via OBD all ok. A lot people say you can’t write back via obd on the SID209. Here used the Ford Custom with the sid209 full read via OBD. Need power supply 14V. Patience is the key. It did fail to write about 5–6 times (because of wifi connection) But it does work. Dpf and adblue solution. www.iecutool.eu

 Will Foxflash read and write Mercedes Benz EDC15C6 dinosaur ECU? via OBD or on bench? Both OBD and bench mode works. OBD Mode: Here is an example: MB 903 2.2 EDC15C6 Old airport used servicevehicle, nowaday used as camper. READ OK FAST 2MIN. WRITE OK FAST 2MIN. CHECKSUMS DONE MANUALLY with L-suite. Needs adapter from obd2 to 14pin round, used launches adapter. Power supply 13V. foxflash worked like charm. Bench mode: E320 CDI W211 OM648 EDC15C6 read and write on bench. Fast and easy. www.iecutool.eu