PCMtuner-tool

 BMW MSD87 read and write data with foxflash successfully. Foxflash pinout to BMW MSD87 SIEMENS MSD87 [ TC1796 INT-EXT.F.] — BMW Step 1: Password Search To find the password, connect via OBD to the car. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD MSD80/81/85/87 BMW → Click on "Find Password" and follow the software messages. The password can also be found on the desk by connecting the following pinout. Now that the password has been found it's possible to read and write the control unit. See next step. Step 2: Read and write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1796 www.iecutool.com

  Question: Can pcmtuner read this Delphi CRD 11 ECU from Mercedes. or other tools? PCMTuner will not read crd11. Ktag will read and write via BDM. ECU — Ktag 3–6 2–1 4–5 6–10 8–7 10–8 And make 2 Bridge. Ktag Protokoll 119 Ecu Delphi DCM3.2 CRD.11 Foxflash/KT200 will read it via OBD or Jtag. Foxflah pinout to Delphi CRD 11 1). Kit to use for connection with JTAG flat cable: – Multifunction cable – Flat color cable Connect multifunction cable as follows: Solder the rainbow flat cable as in the photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x 3). Kit to use for connection with BDM adapter: – Multifunction cable – Delphi adapter – Grey flat cable – Connectors dip/sip Connect multifunction cable as follows: Do a link as in photo: Solder the dip/sip connectors on the pcb: Insert Delphi adapter in REVERSE as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x www.iecutool.

 PCMTuner hardware can be used as a J2534 passthru device for soft like techstream, forscan, VIDA and lots of others tested. Here iecutool.com engineer tested pcmtuner with Nissan Consult iii plus V75.15 software. How to configure PCMTuner with Nissan Consult III+? Install pcmtuner driver ( download driver ) Go to Device Manager check if device is connected You modify registry and DiagnosticTool.ini file to add your interface name exactly as it is in the registry. Append the following lines to the file C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting\DiagnosticTool.ini …………. [device] vi_device_name= [device name, pcmtuner detected as Scanmatik SM-2] ;vi_device_name=Alliance-VI ;vi_device_name=PassThru+ XS [mode] debug_mode=TRUE debug_mode_vehicle_battery=TRUE Tested images:

 Here comes the problem: A user reported that he cannot connect BMW ECU EDC16C1 with foxflash tool . failed to read, tried 3 different pinouts according to instructions on software with no result. Possible Reason: Different HW version. Pinout on FoxFlash could work for other c1 versions but not for this one. Solution: 1.Check connection and power supply Pinout (K-Line): *Watch white cable because there is also a white/red cable in package. If error remains, 2.Try Pinout (with CAN-Line) PIN1&7–12V PIN2 — GND PIN8 — Kline PIN46 — CanH PIN33 — CanL Connect it on Bench Mode. If error remains, remove Bench Box, and connect to device on OBD Mode using GT100 Breakout Box + an extra power supply Feedback: I have a connection with the ecu!

  Fetrotech tool released new software update to fix bugs and modify installation procedure. Check: http://www.pcmtuner.org/fetrotech-tool-new-software-update-aug-2023/ Here is the easy software installation guide, no more software crash problem. To avoid software crash problem, download patch file here ( FE Version patch ) How to Install and Activate Fetrotech Tool (Aug. 2023 Easy Version)? Procedure: Step 1: Install setup Download Fetrotech tool from official website. Turn off anti-virus program before installing software. Install Fetrotech tool setup Install AMT driver Press Install to allow install AMT driver Finish Install driver Fill in user information as required to activate your device if the following dialog box appears Full name, email, country and phone number and Submit Complete installation Step 2: Run Patch Extract FE version zip patch file to the desktop Open FE Version folder Copy AmtTools.dll, AmtTools.sys, FetrotechTool.dll 3 files from