PCMtuner-tool

2012 Land rover Discovery 4 (EDC17CP11) successfully read, DPF and EGR delete, checksum by FoxFlash . All OK. Here's the bench pinout to Land rover EDC17CP11 To read and write use the following driver: → BENCH TRICORE → LAND ROVER → TC1796 — Land Rover → EDC17 CP11 Read OK. Write OK. Car starts fine.

 Most ask if foxflash ecu programmer will read and write PSA DCM7.1B ECU? Yes, foxflash does it without problem, the checksum is made by the tool. How to read and write DCM7.1b with fox flash? NEW BOOT MODE FOR DELPHI ECU DCM7.1A / DCM7.1B BOOT MODE for micro AURIX TC297 mounted on DCM7.1A and DCM7.1B control units of the PSA group. Reading and writing Recovery and checksum available DIRECT BOOT & CNF1 CONNECTION One of the BOOT pins is placed under the microprocessor Example 1: Citroen Jumper 2.2 2020 Dcm7.1b Read and Write ok Example 2: Citroen jumper dcm7.1b — read/write, the checksum is made by the foxflash tool ).

  Foxflash ecu programmer released new update on March, 3rd, 2023. Adds following Ducati ECUs. Ducati install Bosch ME17.9.21 can easy Read&Write now foxFlash is now able to perform the following operations: Bench Read Bench Write Boot Read Boot Write On the following ECU: Bosch ME17.9.21 Vehicles concerned: Ducati 1.198 150hp Support BENCH and BOOT option Update method: Run the foxFlash Manager software, and click the download button till all is done.

 Mercedes Benz SPRINTER 2019 CRD3P.B0 ECU read and write successfully using foxflash ecu programme r on bench. Checksum is done by foxflash. Foxflash pinout to Mercedes CRD3P.B0 To read and write use the following driver: → BENCH MODE → MERCEDES BENZ → TC1793 — MERCEDES and choose between: → CRD3P.B0 Read OK Write OK

  Problem: It's boot mode read file and I tried to write VAG Simos 18.1 with OBD using foxflash software . Tried with 13.5v and without external power. Tried with original and mod file. What this error mean? (Error Patch File) Solution: You cannot write a boot file via obd, simos 18,1 obd is calibration area only file in obd. Users need to understand that the OBD VR file for simos 18.1 is a special file that contains only calibration data. Open ECU and read it in boot mode.

  Foxflash read Mercedes Vito Delphi CRD 2.20 ID via OBD ok, but had writing error and van won't start. Jtag is needed? Solution: That protocol is not 100% working via OBD. Reading works but writing gives problems on CRD2.xx. Write original file with Kess v2 clone will do. Choose "recovery" without ID. You can easily read it by Kess obd even of clone. Updated: Kess v2 fixed it wrote in recovery and starts no issues. Do with kess select recovery original file rewrite and everything will be fine and success to me!! Recovery select file read before wait almost two minutes then start writing file.

  Problem: I have problems starting the foxflash software every time it displays and impossible to change the language and work with it am I the only one? Solution: Foxflash tool must be connected and powered, device driver must be installed correctly (check windows device manager), Windows time auto sync must be off, Foxflash manager app must be open and active to use tool. 1 Shutdown date and time automatically syncs 2: shutdown defender 3: shutdown antivirus system 4: run foxflash manger click Active button 5: keep manager running 6: run foxflash manager Then you will be able to change language and select driver. The procedure is the same as new kt200 programmer.