PCMtuner-tool

 How safe/reliable is Autotuner for ZF 8HP gen3 gearbox TCU? This capability was released around six months ago. Is it safe and trouble free? It works great. All good, stable work. Done at least 50 cars with gen3. Keep the voltage above 12.5V . Works also on newer gen3 from m3 lci, etc. Example: flashed g20 2021. unlock then flash all ok. Very satisfied, no issues.

  XirDecoder ECU chip tuning tool now supports Ford — SID212 ECU. ALL MAPPACK Added! Supported features: • DTC • DPF • EGR • LAMBDA • SCR • STAGE1 • TORQUE MONITOR • TVA • VMAX

  XirDecoder ECU chip tuning tool released new protocols for MD1CS069, MD1CS089 and EDC17CV41 ECUs. Iveco — MD1CS069 ECU Supported features: • DTC • CAT • EGR • LAMBDA • MAF • TVA The New Holland MD1CS069 XIRDecoder now supports: DTC CAT EGR TVA The XIRDecoder for MD1CS089 ECU now supports: DTC CAT EGR LAMBDA MAF STAGE1 TORQUE MONITOR TVA New Holland EDC17CV41 ECU now supports: DTC OFF

  Formulaflash ECU programmer released new software version 1.1.4.0 on March, 10th, 2026. Enhanced Upgrade Toyota GEN2 adapter-free read/write + verification (no disassembly, no adapter required) ME7.8 VIN mismatch / unable to read VIN fix ME7.8+ ME7.8.8 GEN2 unlock upgrade (expanded CAN communication + K-line vehicle model unlocks) ME7.8+ ME7.8.8 CAN communication, PC version adapter-free, no-disassembly OBD FLASH write. Upgrade Contents Toyota GEN2 Flash+EEPROM Read and Write + Verification ME7.8.8 OBD + BENCH FLASH Write ME7.8.8 / ME7.8 GEN2 Unlock (CAN + K) ME7.8+ ME7.8.8 OBD / BENCH / BOOT VIN Correction

 World Exclusive! Alientech KESS3 ecu programmer introduces the Bench protocol f or Ford Continental SID212 ECUs. One of the most requested ECUs on the market can now be worked on directly in the workshop with KESS3. 11.03.2026 — Upgrade 2.96 Alientech further expands the operational possibilities offered by the KESS3 platform with the release of the new protocol dedicated to Continental SID212 ECUs. Present for years on numerous diesel applications, including Ford 2.0 EcoBlue, SID212 ECUs represent one of the most requested solutions among workshops specialised in calibration and electronic programming. With this update, Continental SID212 ECUs can be managed in Bench mode directly with KESS3, allowing professionals to work on the ECU directly in their own workshop, without sending it to external services for unlocking or preparation procedures. This translates into concrete advantages for everyday work: greater operational autonomy faster handling times no a...

  Autotuner released a BETA OBD protocol for Mighty 4JJ1. AT just added support for the Delphi 4J ECU powering the legendary 3.0 TD engine. Supported Models: Isuzu D-Max & MU-X Holden Rodeo Method: OBD Virtual Read (BETA) Fast and efficient! Get the original file from our server directly via the OBD port. Try it out and let us know your feedback! Key Features: Type: Engine Control Unit (ECU) Mode: OBD VR Readout: Calibration MCU: MPC561 Write time: 2min Checksums correction Compatibility List*: Holden Models: Rodeo (2002+) Holden Engines: 3.0 TD (4JJ1) Isuzu Models: D-Max / Vcross (2006+) / MU-X (2013+) Isuzu Engines: 3.0 TD (4JJ1) *The list may evolve over time.

 Iveco Bosch MD1CS069 Now Ready! New Flex update , version 7.49.0.0, now available, implementing OBD programming for the most modern Iveco vehicles equipped with Bosch MD1CS069, even those produced after 2021. Thanks to this new protocol, you can now work directly from the diagnostic port of the vehicle ( bypassing the SGW module), or establishing direct connection through the connector. As of today, working on the map area doesn’t require unlocking the control unit nor shipping it to us: remove DTCs, boost engine performance, or cut consumption, all in a few minutes. Some of the supported vehicles Iveco Daily (IV) 2.3L FPT 16v 134HP Iveco Daily (IV) 3.0L FTP 16v 177HP New protocol available for the following software packages: FLS0.1M — SW Flex ECU (car, van, bike) OBD/Bench Master FLS0.1S — SW Flex ECU (car, van, bike) OBD/Bench Slave FLS0.5M — SW Flex Full Master FLS0.5S — SW Flex Full Slave Newly added protocols: OBD Iveco Bosch MD1CS069 TC299 Read/Write...