PCMtuner-tool

  Foxflash new test report: I repaired an ECU simtec 81.1 Opel. and made a clone without any problems, without knowing the PIN code from the old ECU. I did it in FULL system mode read. It took me just seconds. I work very calmly with foxflash. SIEMENS SIMTEC81.1 — Opel [Gasoline] pinout to foxflash www.iecutool.com

  Problem: When writing alfa Romeo 2017 edc17c69 ecu with foxflash i got an error unlock password… how can I solve it? Solution: Must find password. read it in boot, in bench mode it doesn't read passwords. Boot mode, find password and then write as normal. BOSCH EDC17C69 [ TC1793 INT.F.] — FCA Boot Mode Pinout to foxflash programmer Step 1: Read Password Connect the pinout below with multifunction cable. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD TPROT V11/12 FIAT/ALFA/LANCIAOr OBD PASSWORD TPROT V11/V12 CHRYSLER — JEEP → Click on "Find Password" and follow the software messages. If the password was found with this system, go directly to the boot step to read and write the control unit. Otherwise, see next step.. Step 2: Search Password Connect the pinout below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → PASSWORD BFT → Click on "Find Password" and follow the software mes...

  Foxflash new test report: 2016 fiat abarth 1.4T ME7.3.0 TC1724 is done by foxflash. Read Bench: OK Password found: OK Write bench: OK 2016 model you should bench with no problem.

  Foxflash new test report: Continental MSD81.2 DTC Off, Lambda Off, via OBD on Bench Read ok Write OK Checksum by foxflash. ECU removed from the car with pinout like the OBD connection powered from an external source, without the bench box…….some people say that this connection is for the bench, others say that as long as you don't use the Benchbox it is OBD on the Bench. same pinout, Benchbox and related drivers for bench box are missing (only OBD or boot with foxflash).

  Foxflash new test report: Dcm 6.2A Peugeot expert adblue off -foxflash read obd ok -Remise reset zero diagbox before writing – foxflash OBD write ok, less than 5 minutes -Checksum by foxflash ok -14v battery charger www.iecutool.com

  Foxflash new feedback: Kia rio 1.1 crdi 2013 dcm3.7 ecu -Foxflash obd read ok – foxflash obd wite ok -Checksum by foxflash ok -Battery charger set to 14v

  What's Foxflash OTB Adapter ? The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules. Supported functions: 1: Dual-channel high-speed CAN 2: Three-way BOOT 3: Dual VCC power supply 4: GPT encryption and decryption function 5: Adaptive resistance 6: Adaptive CNF signal adjustment Product design purpose: 1: Ensure that foxFlash can be expanded to the OTB mode of BENCH PLUS in any OBD working mode 2: Achieve high-speed reading and writing 3: Ensure communication security and prevent the possibility of ECU brick due to voltage instability. 4: OTB reading and writing in OBD offline mode 5: ECM, TCM, ACM, DCM direct desktop mode reading and writing 6: Improve the reading and writing speed of some OBD drivers When to use OTB Adapter? When you can't get the car, but protocol just have OBD, so you can use OTB WORK, when you worry OBD brick ecu, then you can use OTB 0 d...