PCMtuner-tool

  IECUTOOL.COM here share one of our customers' solution on foxflash shutdown problem during virtual read and write via OBD. "I would like to share my solved problem with shutdown FoxFlash program . Sometimes program shutdown during virtual read and write via OBD — in 15% progress and dialog window "WAIT INTERNET CONNECTION". I tried reinstall FoxFlash, change USB cable, disable Avast antivirus, disable Win Defender protections (also in registry), change power settings in laptop, reinstall NET. Framework, Visual C++, improve internet connection and the only workable SOLUTION in my case was INSTALL NEW CLEAR OS WINDOWS 10 64bit. I have mess in my old Win10 OS. So now I use dual boot Win10 — old one, and new clear one only for FoxFlash — finally FoxFlash works great always. " If still happens on a clean PC, try a different internet connection like a friends, also check the folder properties are not read only. quitting also occurs during the VR re

 Renault SID310 ECU read and write with foxflash programmer in BOOT mode successfully. Find password ok. Read ok. Write ok. Step 1: Find password via OBD To find the password, connect via OBD to the car. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD SID310 RENAULT — NISSAN — MERCEDES → Click on "Find Password" and follow the software messages. For some models the password can also be found on the desk by connecting the following pinout In this case we find password via OBD directly. Step 2: Read and write ECU with foxflash Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1791 Read Int Flash Micro ok Write Flash ok pcmtuner will read Renault SID310 in boot mode as well. http://www.pcmtuner.org/pcmtuner-renault-sid310-boot-mode-pinout/

 Question: In the foxflash tool car coverage documentation, it is specified that it can bench Psa Sid803a ecu but i can't find the protocol in the foxflash software . Any idea? Solution: As suspected, not using software correctly. Go to FULL SYSTEM >> PEUGEOT >> SIEMENS >> SID803A full system. Here is the PSA SID803A bench pinout to foxflash . It works without bench box. See working experience here http://www.pcmtuner.org/foxflash-clone-psa-sid803a-psa-full-system/

  Fetrotech tool silver read and write Md1cs003 psa on bench in 5 minutes +/-. Dpf/adblue Tprot manually. Pinout is in the document. How to do tprot on this ECU? At the address: 0x2A5D40 2D 0F 00 00 0C C2 → TPROT ON 2D 0F 00 00 82 4F → TPROT OFF NOTE: Fetrotech tool silver works with pcmtuner in default. If need to works alone, modification is required as below: http://www.pcmtuner.org/possible-to-make-fetrotech-tool-silver-work-alone/

 Opel insignia 2.0 2016 Delco E98 foxflash Read/Write OK on bench. Flash Epprom ! checksum OK — adblue off. Here is the Opel Delco E98 ECU bench pinout to fox flash Read and write ok, checksum by foxflash

  Problem: I try an Audi EDC17CP44 virtual reading with foxflash today, it reads OK, but failed to write file (i bought from tuner). i get this error. Any soultion? Solution: Edc17CP44 without 100% correct VR file is impossible to write. No VR file on server matches, just read/write on bench. only manual solutions from professionals, because this ecu should have 3xOTP. Read on bench, then check if the bench file you read is original by comparing it with the file you bought, if it is not just revert the changes to your bench file with WinOLS and start from there. As the VR was not on server, you must read the ECU on bench, modify file and Write on Bench. If the VR is not on server, don't try and just write a sourced file (internet etc etc) via OBD to try to save time. Foxflash Audi EDC17CP44 bench pinout To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN/AUDI/SEAT/SKODA/PORSCHE → TC1797 — VAG → EDC17 CP44

 How to read ecu man edc7c32 with pcmtuner ? EDC7 from Fuso/canter is only supported PCMtuner. For MAN EDC7C32 you will need foxflash programmer. Here is the EDC7 C32 pinout to fox flash. To read and write use the following driver: -> Bench mode ->MAN ->MPC5612-MAN ->EDC7 C32