PCMtuner-tool

  Problem: I need help to install pcmtuner software . Failed to install usb driver. 2 errors 'Could not install USB driver' 'Unable to use selected interface' Solution: This problem is solved by windows reset.

  Question: Hi. I want to know if ecu is supported by pcmtuner . Car Mazda cx7. Answer: Yes module 10 and module 9 — OBD. but as your ecu is on table and not in car, then as the tuner you will have to find correct pinouts. Module 9 Mazda 2nd generation (2008/10–2012/13) 1.3L, 1.5L ZJ/ZY (Mazda2 2011+) 1.5L ZY (Mazda2 US 2011+) 1.6L Z6 (Mazda3 2010+) 1.8L, 2.0L, 2.5L L8/LF/L5 (Mazda6 2008+) 2.0L, 2.3L, 2.5L LF/L3/L5 (Mazda3/5/CX7 2010+) 2.0L LF (Mazda Biante 2013+/2MB) Reading, writing, checksum correction. Module 10 Mazda 3rd generation (2012+) Mazda: 1.5L, 2.0L, 2.5L SKYACTIV-G P5/PE/PY (Mazda3/CX5/6 SkyActiv Mitsubishi) Mazda: 1.5L, 2.0L, 2.5L SKYACTIV-G P5/PE/PY (Mazda3/CX5/6 SkyActiv Denso) Mazda: 2.5T SKYACTIV-G PY (Mazda CX9 SkyActiv Mitsubishi) Mazda: 2.2L SKYACTIV-D SH (Mazda3/CX5/6 SkyActiv Denso) Mazda: 1.6L Z6 (Denso) Reading, writing, checksum correction. pcmtuner Mazda 2009 up denso ecu pinout for 2010 onwards not RF ecu   and here is the pinout on be

  Question: Hi need this Nissan Hitachi ecu pinout for pcmtuner on bench or can it work by obd? Answer: Yes either plugged into vehicle or if NATS not involved and pinout correct obd breakout on bench most nissan hitachi use this pinout

  iECUTool.com here provides the instruction on how to correct TPROT manually for PCMtuner writing on EDC17C60 from PSA group. Credit to PCMTuner Marty. How to change the Tport off manually in edc17c60 PSA? Download and install FLEXHEX Install FLEXHEX setup Accept license agreement Choose destination folder Press Install Finish installing FLEXHex Setup Open FlexHex and our Original flash file Find the 13 byte sequence on our Ori: 2D 0F 00 00 DF 32 04 80 1D C8 D6 A4 00 or similar (first 8 bytes in green always the same) 2D OF 00 00 DF 32 04 80 1D C8 8E 83 00 for TPROT OFF change to 2D 0F 00 00 DF 32 04 80 00 00 00 00 00 we replace the last 5 bytes with 00’s use the search function to find the common 8 bytes from our 13 byte sequence   Now we can change the preceding 5 bytes to Zeros (00) Now we save our file. Now doing the same procedure in WinOLS Open a new project and select our original file following the normal procedures again our byte sequen

 Question: I need wiring diagram to read Hyundai Genesis MT86. No instructions on pcmtuner Check pcmtuner pinout here  

  Iecutool.com here provides pcmtuner bootloader wiring diagram for Hyundai sim2k-240 ecu. sim2k-240 IROM TC1767 Information: BSL130 —  no BSL131 —  yes BSL132 —  no BSL-ADP —  not required Ans here is the wiring diagram from Pcmtuner Marty. NOTE: If pcm tuner failed to verify checksum when save file, it saved though, don’t worry, it will still calculate correctly when writing. Module 50 for 2.0L, 2.4L (SIM2K-140) 2.0L, 2.5L (SIM2K-D160) 2.0L, 2.4L (SIM2K-141/142/341) 2.0L (SIM2K-C201) 2.0L, 2.0T (SIM2K-240/241/242/245) Supported: Reading, Writing, Checksum Correction