Foxflash Failed to Read Suzuki Denso 64F7055 ECU?

 Problem:

I have a problem reading Denso suzuki swift 1.3 Denso 64F7055 full system. I use pinout by foxflash. Do i do somethingh wrong?

Foxflash Failed to Read Suzuki Denso 64F7055 ECU

Foxflash Failed to Read Suzuki Denso 64F7055 ECU

Foxflash Failed to Read Suzuki Denso 64F7055 ECU

Here is the clue.

Disconnect from ecu, USB and POWER.

Resrart computer if you made many attempts. Switch off MFC, try 13.5v. Reconnect and ensure all connects to ecu are firmly on, switch on MFC and restart software and try ID

if 1.3 engine please make GND here, as diagram in foxflash is for 2.0/2.3 ecu

Foxflash Failed to Read Suzuki Denso 64F7055 ECU

FYI:

Foxflash pinout to Denso 64F7055 ECU (2.0/2.3 ecu)

Foxflash Failed to Read Suzuki Denso 64F7055 ECU

If try all above, and still no luck reading this ecu, check ECU label. If the ecu is encrypted, foxflash cannot read it.

Comments

Popular posts from this blog

PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

FoxFlash Read and Write Volvo Denso MB279700-9xxx

How to Find Bosch ECU Serial Numbers and Correct Pinouts