PCMTuner V1.2.7 Common Error Solutions

 Check PCMTuner Flash V1.2.7 new software common errors and solutions.

1). After get license 1+LKtQAIEACnBgIAqv0Zgnt2BgedJkTLAla0yg==, Still need activation. Maybe wrong license?

PCMTuner V1.2.7 Common Error Solutions

Solution:

Need to copy the license to C:\Program Files (x86)\PCMtuner Flash folder. If still not working after copying the license, contact sales@iecutool for technical support via Team Viewer.

PCMTuner V1.2.7 Common Error Solutions

Don't alter or change the name of the file when saving it because if you do then the license file won't work and you will have the activation problem despite loading it into the system. Let the license open with pcmtuner flash.

The other mistake that people are making is although its telling you to copy and paste the file into the directory that won't work either and will causes issues so what we found is if you actually physically move and drag the license file into the directory fully then open the pcm flash software then that also solves the problem as well and it will work perfectly first time every time with the licence files if you follow the instructions there.

please set up the license file default open with pcmtuner flash,or it will always ask the license.

If still not working doing above (ask for activation over and over again) after copying the license, delete current pcmtuner program, download and install PCM Suite on tuner-box.com

2).

error Usb not accessible after update pcmflash to 1.2.7

PCMTuner V1.2.7 Common Error Solutions

Solution:

Never update PCMFlash!!! PCMflash software is 1.2.0. V1.2.7 is the version of PCMTuner flash program

PCMTuner V1.2.7 Common Error Solutions

Delete this version, download and install pcmtuner flash setup.exe here

https://we.tl/t-MBrpSFH0eQ

Press No if it ask to update pcmflash 1.2.7 on server.

PCMTuner V1.2.7 Common Error Solutions

Follow this guide to disable this error message

http://www.pcmtuner.org/pcmtuner-how-to-stop-pcmflash-updates/

3). I'm a pcmtuner user and ever since i downloaded the new version 1.2.7 the pcm tuner flesh won't start. I tried running it as admin and it won't open. any advice?

Send device ID to info@tuner-box.com, you will receive a registration key within 24hours.

PCMTuner V1.2.7 Common Error Solutions

PCMTuner V1.2.7 Common Error Solutions

Follow instruction here to get software activated.

http://www.pcmtuner.org/update-pcmtuner-software-to-v1-2-7/

4). What new is include in this new version?

Just the logo. Name of software and credits inside it.

5).

I tried the installation of pcmtuner flash 1.2.7, I am stuck on this error, I do not use a virtual machine antivirus protection and firewall disabled. It is a Lenovo G50 portable PC. with windows 10pro 21H2. Anyone has an idea?!

PCMTuner V1.2.7 Common Error Solutions

Solution:

http://www.pcmtuner.org/pcmtuner-v127-error-dont-run-in-a-virtual-machine-solution/

Comments

Post a Comment

Popular posts from this blog

PCMTuner Unlock Audi SIMOS 8.6 in BSL Mode

Image
 SIMOS 8.6 requires unlocking in BSL mode by the appropriate module. BSL is usually boot mode for unlock. Same as PCR2.1 . Example: Audi A7 2012 2.8 fsi simos 8.6 unlock, after read/write simos8.6 with pcmtuner successfully. all resistor 1 kom How to work with blocks that require unlocking (PCR2.1, SIMOS8.6): 1) Check the current lock status in the car, if the check is disabled, you can go to read-write, otherwise follow the instructions 2) Remove the unit from the car, open it, transfer the processor to BSL mode using the connection below (PCR2.1, SIMOS8.6), the work as a whole as in the package 53 (you can use tools like powerbox, and you can do without them) SIMOS8.6 Unlock pcmtuner pinout Red — +12, Black — GND, Yellow — CAN-HIGH, Blue — CAN-LOW 3) Choose "SIMOS8.6 (EEPROM/UNLOCK/BSL) or PCR2.1 (EEPROM/UNLOCK/BSL)" depending of ECU type 4) Click Identification — save ECU data somewhere in a text file. 5) Click Read — save the EEPROM 6) Given that EC...
Read more

How to Find Bosch ECU Serial Numbers and Correct Pinouts

Image
 Here is basic post for people asking basic questions, apparently now on high demand since we have gathered again new members in our ECU group . So you got bosch ecu in hand from car and how to figure out how to identify it and what pinout to use? On this case we can randomly take one bosch ecu that we will identify. So all bosch ecus start with serial numbers 028… 026. We just head to bosches page next https://www.bosch-repair-service.com/ Here you search by oe or bosch number, i have random bosch ecu here and it’s 0 281 014 544 and bosch page ends up with a result. We can see its edc16cp35. Now there are two ways. Either to search in foxflash bmw / edc16cp35 for pinout. Or we head to ecu pinout page and figure out pinout from there. One of the best online pinout catalogs can be found at ecu desing, So save webpage https://ecu.design/ecu-pinout/ Copy address and head out there. Type in edc16cp35, bmw uses two processors in this one mpc 562 and mpc564. Pinouts jus...
Read more

FoxFlash Read and Write Volvo Denso MB279700-9xxx

Image
 Foxflash Volvo Denso MB279700–9xxx works perfectly, just follow the steps of foxflash , reading, unlocking, and writing all done on the bench. PROCEDURE: 1 — Read the Ecu AND unlock the Ecu 2 — Write the ECU READING AND UNLOCKING: Connect the following pinout using the multifunction cable. Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit. WRITING: Now it will be possible to reconnect the control unit to the car and write the modified file via OBD. Use the following driver: CAR > VOLVO > Model >2.0 DENSO MB279700 9641 SH72546R CAN Alternatively, you can WRITE also the ECU on the table using the pinout on the next page. Note: Compared to the read pinout, the CAN line is moved. FOXFLASH PINOUT FOR WRITING: Just follow the foxflash instructions: read file 15 min, unl...
Read more