How to Install and Activate PCMTuner MPM ECU Tuning Software?
2022 new MPM ECU Tuning tool software can be controlled by PCMTuner application. Here is the guide on MPM ecu tuning software download, installation and activation.
Software version:
VCM Suite V4.10.4
Operating system: Windows 7/Windows 10
Download MPM ECU Tuning Software
Open the website(www.tuner-box.com) to download the software (you need to enter your email and mobile phone number when downloading the software)
How to Install and Activate MPM ECU Tuning Software?
1.Download MPM ECU Tuning software above
2. Install the pcmtuner software, and the computer must not open anti-virus software (refer to the guide below for the specific installation steps, )
3. After the PCMTUNER software is installed, run it, and then go to register (after registering, please send your email to the seller to activate the software).
4. After activation, connect the MPM device to the computer via the usb cable and install the driver (Driver official website download link: www.tuner-box.com).
5. Please click the “MPM Plug” menu option, it will start the internal download, you can get all the plug-in files.
6. After the download is complete, please restart the PCMTUNER software,
thenclick“MPM Plug”, fill in the activation password again, and you can obtain
the activation password in the following two ways:
(1) Open the official
website (www.tuner box.com) , foreign customers can add technical staff’s
“whatapp” number and send Hardware ID to them to get activation
password.
If you are a Chinese user, please contact www.iectuool.com, then send the Hardware ID, and you will receive an activation password.
(2) Log into the website www.tuner-box.com, (the account number is your email +serial number), click “Create new ticket” and enter the Hardware ID to submit the activation. The engineer will send you an activation code within 24 hours. After obtaining the activation password, please operate as shown below:
Comments
Post a Comment