PCMtuner-tool

 PCMTuner Toyota denso ECU related frequency asked questions and answers. Question 1: pcmtuner will read this Toyota auris ECU (89661–02D82) in bench or obd? which module? Answer: obd module 35, try ID to obtain ECU info. Question 2: Toyota RAV4 failed to read OBD with pcmtuner Answer: It is VR reading Only. Pcm tuner will read ID of the ECU, try module 35 for ID or maybe gen2 hilux then module 46 for ID. Note the HW and SW numbers. Log on to VZ performance, click search, enter either number in search box, press enter twice. You then obtain original file using the ID information, modify the file and write to ECU. Check: pcmtuner module 35 and 46 instruction Question 3: Can someone help me solve this problem I can’t read this calculator Toyota hilux 2TR-FE by obd2 Answer: Only ID, find ori file then write, gen1 cannot read only ID Question 4: How to get Toyota Virtual file from pcm tuner? Answer: ID the ECU, note the HW and SW numbers. log on to VZ performance,

 Here’s the PCMTUNER INFORMATION FOR MODULE 35 and 46. Module 35 Toyota/Lexus/Scion/Hino generation 1 The package consists of three modules, which differ in the type of connection with the blocks. 6F0038/39/40/70/85, MPC565, SH72512 CAN-bus — for operation via CAN bus 76F0004/23/38/39/40, MPC565 K-Line — for K-Line operation 76F0004/23/38/39/40 K-Line JDM — for K-Line operation for the Japanese market. The type of processor is indicated for general information, the program will automatically determine everything that it needs. Checksum verification and correction is supported. These processors are installed in units manufactured by Denso, Fujitsu Ten, Hitachi/Delphi. Important: Before working on the vehicle, read the general rules that must be observed. Start working with the control unit with identification until it happens with a positive result. After that, find a file with a completely matching software version and start recording. On machines with K-Line, it i

  Question: Hi, Pcmtuner or FC-200? Which one is better? Here comes the table comparison: PCMTuner vs FC200 in ECU capabilities *Keep updating… Summary: FC200 has more protocol FC200 can only do checksum fix online, checksum won’t work if the subscription expires. FC-200 works only on Bosch ECUs, So for Magneti Marelli, Continental or siemens pcmtuner is better If you want to used for dpf,egr, adblue off and remap, PCMTuner is better FC200 only some BMW ECU can be done via OBD PCMTuner interface cannot do BMW ECUs (EDC17xx etc) In conclusion, depends on what is the main purpose of your buy. FC-200 could be useful for BMW ISN from Ecu or maybe for some Ecu cloning, but only some of them because most of MEDC17 needs adaption of OTP and password or immo transfer for successful cloning. If the main purpose is Chip tuning, PCMTuner is a better buy because it can calculate checksums and it is cheaper.

Question: Can PCMtuner be used as Passthru j2534 to work with other programs? For example ODIS, Xhentry, GDS2, Techstream, MDflasher and other Passthru programs! Has anyone tested it? Answer: Yes works with other flashers and many pass-thru soft like techstream, forscan, VIDA and lots of others tested. You have to test on your side. It’s a scanmatik 2 pro (SM2). It installs as scanmatik interface so any software that works with scanmatik as passthru will work. It works with VW Audi, GM, MB, BMW ISTA. PCMTuner team has tested before. But you need to test again. Some tested on GM GDS2, it is not a big problem. VAG ODIS can work with pcm tuner too. Some also test with Renault clip (check here ) iecutool.com engineer has tested the pcmtuner with techstream v17.00.020 without issue. You are free to test with Ford ids, Bmw ista, xentry etc. It is a bonus feature. We are not responsible for the damage. But when you do that, you need to choose pcmtuner driver. So our pcm

 Here is the PCMtuner Module 53  — Infineon Tricore BSL operation guide by PCMtuner Marty. MODULE 53 —  Infineon Tricore BSL Description and example operation 1 This module is for qualified users only and requires access to the ECU pcb and in some cases the soldering of additional components. The work is performed in bench mode (BUT ECU disassembling is required). The module supports many ECU’s with the TC1724, TC1728, TC1736, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 and TC1798 microcontrollers of Bosch, Siemens / Continental and Delphi ECUs. The password can be read from SIM2K-24x, Ford EMS22XX, Ford SID20X, Bosch, Bosch GPT ECUs. The opens to possibilities to MANY ecus not supported by other modules. Compatibility TC1762/TC1766 MICRO (1504KB) TC1762/TC1766 EEPROM (32KB) TC1792/TC1796 MICRO (2048KB) TC1796 MICRO+EXT (4096KB/6144KB) TC1796 EXT (2048KB/4096KB) TC1792 EEPROM (64KB) TC1796 EEPROM (128KB) TC1736 MICRO (1024KB) TC1736 EEPROM (3

2022 new MPM ECU Tuning tool software can be controlled by PCMTuner application. Here is the guide on MPM ecu tuning software download, installation and activation. Software version: VCM Suite V4.10.4 Operating system: Windows 7/Windows 10 Download MPM ECU Tuning Software Open the website(www.tuner-box.com) to download the software (you need to enter your email and mobile phone number when downloading the software) How to Install and Activate MPM ECU Tuning Software? 1.Download MPM ECU Tuning software above 2. Install the pcmtuner software , and the computer must not open anti-virus software (refer to the guide below for the specific installation steps, ) PCMTuner installation guide 3. After the PCMTUNER software is installed, run it, and then go to register (after registering, please send your email to the seller to activate the software). 4. After activation, connect the MPM device to the computer via the usb cable and install the driver (Driver official web