PCMtuner-tool

 New upgrade-pack for Alientech KESS3 programmer: Reprogram heavy-duty vehicles and Mercedes Benz with " CPC " ECUs. With the latest KESS3 upgrade, you can now expand your workshop’s capabilities by reprogramming Mercedes-Benz "CPC" ECUs, alongside newly supported ACM and UDM control units dedicated to heavy-duty vehicles. Here’s what the new development unlocks: With the Bosch VC1CC001 CPC5 units now supported, you can unlock unparalleled potential in Mercedes-Benz trucks. This update also enables work in "BOOT" mode on Delphi CPC2 series control units, covering a wide range of Smart and Mercedes-Benz models. This update is also a game-changer for the heavy-duty sector: support for Bosch EGC4.0 ECUs in Scania CNG trucks, Delphi DCM6.24, and Denso 275700–1762 ECUs for popular Asian brands. Finally, there are new capabilities for Continental ACM SPC564A70 and Bosch RBA1DGS1 control units in Volvo and Hino vehicles. Supported control units: KE...

 In the latest update, the CG FC200 ECU programmer added the "Three Readiness Monitors not Ready" function for GM Delco ECUs. FC200 released the new software version V1.2.5.1 on Jan. 15th, 2025. V1.2.5.1 Registered Version NEW (2025.01.15) New Functions: 1. Added Wuling SIM2K-51.4 read/write, VIN modification, and Three Readiness Monitors not Ready functions 2. Added Jinbei Lingdian TR40 read/write, VIN modification, and Three Readiness Monitors not Ready functions 3. Added Three Readiness Monitors not Ready functions of Volkswagen ECUs : MED17.1.6, MED17.1, MED17.5, MED17.5.1, MED17.5.2, ME17.5.22, MED17.1.10, MED17.5.20, MED17.5.25, MED17.5.5, EDC17CP14 4. Added Three Readiness Monitors not Ready functions of BMW N20/N55/B38/N13 ECUs: MEVD17.2.5, MEVD17.2.4, MEVD17.2.9, MEVD17.2.P, MEVD17.2, MEVD17.2.6, MEVD17.2.G, MEVD17.2.K, MEVD17.2.3 5. Added verification function ECUs: ME7, ME7.8.8, ME7.9.7, ME7.9.71, M7.9.7, M7.9.7.1, ME7.5.20 Bug fixes: 1. Fixed ...

 Ford Transit Custom 2.0 TDCI/TDDI 125kW MY 12/2016 SID211 Read and Write with Foxflash via OBD-Protocol in Direct-Mod via Pinout (via OBD on bench). Read 2min 51sec Write 10min 59sec For EGR and selected DTC off. Read/Write by Foxflash software. CS by Winols Use this pinout www.iecutool.eu

  FormulaFlash ECU and TCU programmer released new software Version 1.0.1.2 on Jan. 16th, 2025. Update Date: January 16, 2025 Features: BMW Leading Functions • Models supported: MD1CP002 (SPC5777), MD1CP032 (TC298TP), MD1CS001 (TC298TP), MG1CS003 (SPC5777), MG1CS024 (TC298TP), MG1CS201 (TC298TP) • Key Features: • EPROM checksum • One-click modification of VIN/ISN Activation: FREE VW Leading Functions • Supported Modules: VW & Audi MED17/EDC17 • Key Features: • EPROM checksum • IMMO off/IMMO cloning/new status mode • One-click modification of VIN • One-click operation for power level/IMMO ID data synchronization Activation: FREE Additional Enhancements • Supported GM Models: E37/E39/E39A/E67/E78/E87/E98/E92/E80/E83 Improvements: • Checksum algorithm upgrade for increased stability and reliability Added Features: • Magneti Marelli IAW 4HV 95320 EPROM read/write • Magneti Marelli IAW 7GV 95320 EPROM read/write • Bosch MEG17.9.21 TC1724N EPROM/Flash read/write ...

 Tutorial: How to clone Audi DQ380 (ODE) transmission gearbox TCU with Launch X-prog3 and PC adapter on bench. Run X-prog3 PC software. Quick search DQ380. Select Audi A3 2002–2020 DQ380 (0DE) TCU. Check wiring diagram. X-prog3 shows two connection methods. Wires connection or using DQ380 gearbox adapter. Here we use connect TCU with PC adapter via DQ380 gearbox adapter. Connect TCU. Read complete data (all data) and save. Then press Disconnect. Disconnect TCU with x-prog3 PC adapter. Connect a donor DQ380 TCU with x-prog3 and PC adapter . Connect the donor TCU. Better back up data of the donor TCU. Then hit Write complete data (all data) to the donor TCU. Cloning DQ380 gearbox completed. Disconnect donor TCU. Install to vehicle and test. Done. www.iecutool.eu

 Launch X431 released new ECU/TCU cloning software V10.40. Support Products: Launch X-431 ECU TCU programmer , X-prog3 and PC adapter , Launch X431 scanner with X-prog3 V10.40 1. Added read and write, personalization, clearing function for BOOT mode Benz transmission TCU VGS4–0-NAG2, VGS4–500-NAG2. 2. Added BENCH mode Cadillac, Chevrolet transmission ECU T87A read and write function. 3. Added read and write function for BENCH mode Great Wall transmission ECU 7DCT450 . 4. Added read and write function for BENCH mode Great Wall, Geely engine ECU MG1US008/MG1UA008 . 5. Optimized BMW E83 data read issue. 6. Optimize the expired device usage status so that when the device is expired, the functions released before the expiration can still be used. New updates are restricted to download when the free subscription has expired How to clean/reset Benz VGS4 Gearbox with Launch X-prog3? After erase VGS4, you can program and adapt to vehicle for replacement. Function Descri...

  Problem: Read and write IVECO DAILY 3.0 CR 170hp EDC17C49 with foxflash programmer . If i Perform Cheksum YES. it asks to load the ori files. When I load Ori file then get an error: OUT OF MEMORY IN THE COMPUTER. Any idea? Solution: Restart your computer and try again. User feedback: SOLVED! RESTART COMPUTER. Read ok. Write ok. Adblue OFF. www.iecutool.eu