PCMtuner-tool

  Problem: I tried to write VAG MED17.5 TC1766 modified file with Foxflash , but failed. It says error incorrect file. OTP sector not writable. Solution: The message says it all, the file you are writing contains information for the OTP area, either the file has been modified wrongly, does not come from the Ori file, or address offsets have changed through a solution software used to modify the file. If you write Ori back without problem then problem is your file. Do solution in Winols from Original file.

 New test report: FoxFlash programming (read/write) John Deere 6430 premium engine control L14 via OBD port successfully. Connect foxflash with laptop and John deere via OBD In Foxflash software , select John Deere-> 6230–6330–6430 Premium->4.5L ENG CNTR L14′ CAN Foxflash read data very fast. Needs around 14v though. Then save data. Vehicle starts fine.

 MITSUBISHI Pajero 3.2 DID Foxflash full read/write in boot mode with checksum. Auto checksum with foxflash. MITSUBISHI E6T0x boot mode pinout In Foxflash software , select driver ->Tools boot mode ->Mitsubishi boot ->ET60X 3.1/2.5 RD Mitsubishi/Mazda MH8102F

 Here is the demonstration of unlocking a VAG Simos PCR2.1 ECU with Foxflash programmer in bench mode, unlocking allows all future programming to be done through OBD as well. FoxFlash PCR2.1 Unlock in bench mode PCR2.1 Unlock bench mode pinout To read and write use the following driver: → BENCH MODE → VW / AUDI / SEAT / SKODA → TC1796 — VAG → SIMOS PCR2.1 1. Unlock eeprom. 2. Read/Modify/Write flash. 3. Checksum Fox flash

  Foxflash successfully read and write EDC16c3 Peugeot/Renault in BDM Mode. Read ID ok Read eeprom and flash pk Checksum is done by foxflash. Write Ext Flash ok. Very stable and fast. It's a adapter from ktag. some work some don't as pin different. Foxflash soon released Foxflash adapters . Here's the BDM pinout to EDC16c3 ECU To read and write use the following driver: → BENCH MODE → [brand] → MPC555/6 — [brand] → EDC16 C3 Read OK Write OK

 VAG Audi Siemens PPD1.2G feedback! Foxflash online reading and writing Audi A3 170 hp PPD1.2G via OBD successfully. PPD works without Problems over OBD. These are supported VAG PPD.x list of fox flash . Audi car A3 2.0l 16V TDI Siemens PPD1 Audi car A4 2.0l 16V TDI Siemens PPD1 Seat car Altea 2.0l 16V TDI Siemens PPD1 Seat car Leon 2.0l 16V TDI Siemens PPD1 Skoda car Octavia 2.0l 16V TDI Siemens PPD1 Volkswagen car Golf V 2.0l 16V TDI Siemens PPD1 Volkswagen car Passat 2.0l 16V TDI Siemens PPD1

  OBDSTAR MT501 is a multi-function bench test platform which is specially developed by OBDSTAR to power on vehicle's dashboard, A/C panel, Gear lever and ABS for automotive maintenance technicians repairing or detecting on the platform without CANBUS communication. It's able to use for AUDI, BMW, Benz, Land Rover/Jaguar and more vehicles. Today's article mainly shares how to activate Mercedes- Benz dashboard on using MT501. Currently, Benz 205, 213, 222, W204, W212, W221 dashboards are supported by OBDSTAR MT501. Device & accessories required: OBDSTAR MT501 main unit Main cable OBDSTAR P004 adapter+ P004 Jumper 12V2A Charger Mercedes- Benz W205, W211, W221 Dashboard Operation time: Approx. 3 minutes How to do: Power on OBDSTAR MT501 Bench Test Platform Enter Test Platform function Agree with the disclaimer Select DASHBOARD>> DASHOBOARD V30.11 (choose the newest software version)>> Brand: Benz>> the related Benz model Clic