PCMtuner-tool

  iECUTool.eu rolls out Volvo Renault TRW EMS2.x bench cable for foxflash/kt200 etc ecu programmers. Applied ECUs: Renault / Volvo: – TRW EMS2.2 – TRW EMS2.3 – TRW EMS2.4 Compatible tools: Foxflash , KT200 or other ECU tools can read EMS2.x ECU Function: Used to connect to ECU module (read and write ECU) without the risk of bending pins, and also saves a lot of time. This cable can be used on VOLVO and Renault Trucks equipped with TRW EMS2.2, TRW EMS2.3, TRW EMS2.4. Thanks to this cable, you can work on them in Bench Mode. How to connect Volvo EMS2.x bench cable with foxflash/kt200? There are two connection methods. Check wiring diagram below

 It’s a 2011 Opel Astra with Denso 64F7059 ECU. Which tool to read these Opel Denso ECUs and by what method? Here is the clue. KESS v2 works no these Denso ECUs. But KESS can kill these ECUs because of checksum. It works through obd with mpps v18. Use mpps to do checksum by itself. But if you need a full reading, you need to use foxflash (Full system bench). Feedback: kess/mpps not working, Foxflash read, write ok and checksum by foxflash.

  Foxflash new user report: Seat Leon 2.0 TSI 2019 Bosch MG1CS111. Not Simos 18. On this one it’s a Bosch mg1cs111. Read ok Write ok Stage 1 par Stgfiles Checksum by Foxflash Perfectly. Image attached:

  Alientech KESS3 New protocol update-Remap and clone the Siemens SIM4LKE and Siemens EMS2214 ECUs equipped on Mercedes-Benz and Ford vehicles. Offer a comprehensive service to your customers thanks to new protocols for KESS3.   LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD! UPGRADE 1.98   Increase job opportunities for your workshop with two new developments dedicated to some older vehicles. Work with the "BOOT" bench mode to optimize performance and particularly for repairing Siemens SIM4LKE and EMS2214 ECUs equipped on Mercedes-Benz Kompressor and Ford Duratec engines. Focus on the new ECUs:   Siemens SIM4LKE Siemens EMS2214   Choose how to operate on thousands of ECUs, in the connection mode you prefer, depending on the type of work required by your customers. Benz Read, Write and Clone in Boot Mode Ford Read, Write and Clone in Boot Mode Fiesta - 1.6 Duratec TI-VCT 5MT — Petrol — 88 kW   Activate the CAR — BENCH/BOOT protoco

  Problem: One of our customers’ got an error when updating foxflash software . Error ‘The request was aborted: Could not creat SSL/TLS secure channel’. Solution: Win7 Operating system issue. Delete foxflash manager, download, and install again. If still not working, change a Windows 10 laptop and try again. www.iecutool.eu

 Today we are going to read Mahindra Bosch EDC16C39 ECU with OBDSTAR DC706 and P003+ adapter. For some EDC16 ECUs you must use P003+ or MP001 , old P003 does not work. 12 volt supply will be required. Go to ECM function, quick search EDC16C39 and select EDC16C39 MPC561(2)+ M588W016D(F)B Choose Bench mode with P003+ adapter Check wiring diagram Then connect DC706 with EDC16 ECU via P003+ Connect ECM Read EXT eeprom and save Read EXT flash and save. Write EXT eeprom Write EXT eeprom successfully Write EXT flash Write EXT flash successfully. www.iecutool.eu

  Problem: I have tried to read this ECU Bosch ME7.6.2 through the Alientech KESS3 Bench mode and it’s doesn’t respond. Does its mean the ECU is damaged? Any help? Possible solutions to KESS3 ECU communication error: 1. The device does not respond to communication with the ECU, maybe you can try changing the voltage (Power supply) to a more suitable one. 2. Sometimes you have to try many times. Always double and triple check connections. 3. There is a possibility that the protocol is not working. Check coverage before reading. 4. The ECU is damaged. 5. Open a ticket and seek help from Alientech technicians. www.iecutool.eu