PCMtuner-tool

  iECUTool.eu rolls out Volvo Renault TRW EMS2.x bench cable for foxflash/kt200 etc ecu programmers. Applied ECUs: Renault / Volvo: – TRW EMS2.2 – TRW EMS2.3 – TRW EMS2.4 Compatible tools: Foxflash , KT200 or other ECU tools can read EMS2.x ECU Function: Used to connect to ECU module (read and write ECU) without the risk of bending pins, and also saves a lot of time. This cable can be used on VOLVO and Renault Trucks equipped with TRW EMS2.2, TRW EMS2.3, TRW EMS2.4. Thanks to this cable, you can work on them in Bench Mode. How to connect Volvo EMS2.x bench cable with foxflash/kt200? There are two connection methods. Check wiring diagram below

 It’s a 2011 Opel Astra with Denso 64F7059 ECU. Which tool to read these Opel Denso ECUs and by what method? Here is the clue. KESS v2 works no these Denso ECUs. But KESS can kill these ECUs because of checksum. It works through obd with mpps v18. Use mpps to do checksum by itself. But if you need a full reading, you need to use foxflash (Full system bench). Feedback: kess/mpps not working, Foxflash read, write ok and checksum by foxflash.

  Foxflash new user report: Seat Leon 2.0 TSI 2019 Bosch MG1CS111. Not Simos 18. On this one it’s a Bosch mg1cs111. Read ok Write ok Stage 1 par Stgfiles Checksum by Foxflash Perfectly. Image attached:

  Problem: One of our customers’ got an error when updating foxflash software . Error ‘The request was aborted: Could not creat SSL/TLS secure channel’. Solution: Win7 Operating system issue. Delete foxflash manager, download, and install again. If still not working, change a Windows 10 laptop and try again. www.iecutool.eu

  Problem: Foxflash not connecting with Audi a4 2017 EDC17CP74 ECU. Any advise? Solution: Try another pinout V2. Use pinout from Pinout from ktag or dimsport. V2 pin out is not in foxflash. Feedback: All working now this was Audi A4 a 2017 edc17cp74. V2 pinout is slightly different with can high and low. Worked it out this is v2 can h can l are next to ignition wire all working now. www.iecutool.eu

  Foxflash new user report: Iveco EDC7UC31 ECU Read ok Write OK Checksum by foxflash R/W/CS Ok This ecu reads and writes ok on bench. Foxflash pinout to Iveco EDC7UC31 ECU To read and write use the following driver: → BENCH MODE → [Iveco] → MPC561-[Iveco] → EDC7 UC31 www.iecutool.eu

  Problem: Writing problem on Valeo v46.11 psa who has already had this problem and what is the solution? I specify that I have tried with foxflash in obd and bench… Reading and id read without worries. Writing ecu gives error SK1. Solution: Few silent key errors fixes Ecu locked by immobilizer. Boot only Or Was your your car in eco mode when trying to read? Try to Add voltage 14v+ You can also try obd protocol in breakout box connection like in otb adapter. www.iecutool.eu

  Foxflash new user report: VW Passat 2011 1.6 tdi Simos Pcr2.1 Unlock eeprom Benched flash + eprom All in foxflash, all in bench. no problems read/write/checksum correction. How to do pcr2.1? Connect ecu in bench 1.First Read flash -it will save flash + password on flash 2.read eprom 3.now write back same eprom you readed in step 2 -it will ask for obd patch and unlock, select yes. (Eprom unlock) 3. Send flash for modify 4.save mod file in same archive where password is. 5.open mod and write it. (Flash unlock). 6.drop ecu in car and off you go www.iecutool.eu

 Here comes the user feedback on VAG MED17.5.5 ECU: VAG Med17.5.5 tc1766 ECU Foxflash boot mode, error on bench (worng driver selected) So tried tc1767 driver ( software prompts same error ) Original pcmflash on bench also error (too high tprot). Ktag clone also error. Back to foxflash boot mode …error unlock password. Selected Tools boot obd password for vag tprot8+ with different pinout and got the password saved. After that everything went smoothly in boot mode. Normally these bench-jobs don’t take long , this one got a little out of hand but foxflash saved the day after all. www.iecutool.eu

  Foxflash released new Manager software 1.4.1 on April 20th, 2024. What’s new in version 1.41? No new protocol updated. Improve reading/writing speed. How to update? When you open foxflash software, it will ask if want to update. Press Yes to update. Why the program doesn’t open after updating to version 1.4.1? It will be fixed after a restart and a few attempts to start. www.iecutool.eu

  Foxflash new user report: Fiat Tipo 2.0L 16V EcoJet 88kW/118HP ECU Fiat MD1CS006 Bench read ok Bench write ok Checksum Fail!! checksum impossible to correct but it worked without sum xD Adblue Off ok. Images attached: www.iecutool.com

  Problem: Help with Simos PCR 2.1. Mistake Write file with foxflash without unlock via obd, error at 99%, so now can't connect in obd, in bench only in boot and can't write, can't connect password tool boot. Any solution? No more boot connection Solution: There is no obd connection so no solution. New ecu. You read everything on the bench and then when you read everything you write the eprom in the eprom and it unlocks it. In obd never do to unlock it If you don't manage to pick it up, buy the exact same ECU with the same numbers on the white label and do IMMO Off. Feedback: Solved by new ecu and Immo off. www.iecutool.com

 Some foxflash users got the update server error recently. Error "There is a problem reaching update server". reinstall C++ net framework etc not work, now Error SSL/TLS connection. image attached: Solution: The problem is with you and your pc, not foxflash. Looks like possible virus protection deleting the dll from install. Check the antivirus, and the file x32 and x64. Defender/antivirus all pernament off. Turn off firewall, disable Defender at first and then make an exception in Defender to Foxflash directory. www.iecutool.com

  Problem: BMW 328i N20B20A MEVD17.2.4 OBD read file not found database error. I'm trying read with foxflash on bench but it has error message. Does anyone know how to resolve this error? Solution: 13.8v 3am and power the foxflash directly —  not to the bench box! Try again bench but power have to be connected to foxflash directly — power port on the side usb connector. Not to the bench box. www.iecutool.com

  Foxflash new user report: Foxflash read and write Claas Arion stage 5 MEDCE101 tractor ECU successfully via OBD. Benchlocked MD1CE101 doable via OBD Read ok write ok Checksum by foxflash Stage2+ DEF FPT Claas StageV. Keep voltage above 14vdc to avoid SK error before it starts writing. www.iecutool.com

How to Start ECU Cloning? Which Tool is Good for Beginners? ECU (Engine Control Unit) cloning is simply transferring the ECU file from one ECU to another, so that the new ECU operates similarly to the original one. It can be a useful tool for vehicle owners and mechanics in certain situations, whether it's replacing a damaged ECU, upgrading to a newer version of the software, or customizing the engine management system, saving cost, or using a preferred brand of ECU, etc. So how to get started for beginners who are interested in ECU cloning? Which tool is good to choose? Here are some suggestions below. 1.Learn the basics of ECU Cloning 2.Get right ECU tools 3.Join a community 4.Start small In detail… 1.Learn the basics of ECU Cloning: Start by understanding what an ECU is, how it works, and how it affects your engine's performance. There are many online resources you can search to learn the basics of ECU cloning. 2.Get right ECU tools: You'll need a laptop, a