PCMtuner-tool

 With OBDSTAR DC706 , users can read eeprom and flash on a 2011 VW jetta ME17.5.6 ECU, then use the immo decoder function to get the CS and PIN code from the ECU. Immo data decryption give you the pin and CS. Read eeprom and flash, then hit immo data calculation. then it gives you CS, pin and MAC. It also reads immo data, so you can load that in your key programmer and make a dealer key with the CS and PIN. Much easier to do AKL this way than pulling the cluster. It is a hell of a lot easier than pulling the cluster. key work with 00 7th byte CS. then manually programmed remote. www.iecutool.eu

  Problem: How to solve this problem. after installing new Foxflash version 1.4.2 on windows 7? Error "Unable to Check Server". I always use Windows 7, this happened after the update. Solution: This message will appear on Win7 system. On Win10 it does not appear. Some use it on Windows 7, getting this message for a few days, but FoxFlash will load without a problem. Try running it without pressing OK. I f it doesn’t work, restart the computer and try again despite this message. After a few days this message didn’t come out again and it still works well with the latest version 1.4.2 of FoxFlash. We strongly recommend installing foxflash software on Win10 or Win11 systems. www.iecutool.eu

  Foxflash read and write Iveco STRALIS EDC17CV41 ECU on bench successfully. To read and write use the following driver: → BENCH MODE → Iveco → TC1797 — Iveco → EDC17 CV41 Read ok, write ok Checksum by foxflash. EGR + DPF off. Check pinout here http://www.pcmtuner.org/edc17cv41-pinouts-to-pcmtuner-and-foxflash/

 Audi A6 2.0l tdi 2010 Possible to read and write with foxflash via obd? Tried to read via OBD but failed. It is written, bench or boot mode. 2010 has Tprot. Only bench mode to bypassing tprot. Bench write and read ok. Check bench pinout here http://www.pcmtuner.org/foxflash-read-and-write-audi-a4-2-0-edc17cp14-ecu/

Foxflash read and write Mazda CX-5 Denso ECU SH1K via OBD successfully. OBD Read/Write worked fine. Photos added. Read time takes 30 minutes. But it works. Select ->OBD driver ->Mazda ->Mazda CX-5 ->2.2 SKYACTIV-D Denso SH1X *CAN Voltage 14V. EGR Off.

 It is a Ford Transit Visteon with DCU101 ECU. Foxflash will read and write this ECU via OBD. It is DCU 101 but protocol DCU 102/108 works. Select OBD drive ->Ford ->Transit ->2.2/2.4 TDCI E4 FOMOCO VISTEON DCU 102/108 *CAN Read ok via OBD. Write OK via OBD. Checksum by foxflash. EGR + DPF OFF. www.iecutool.eu

  FormulaFlash released new software 1.0.0.7 on October 21st, 2024. 1. Adds ME788 BSL mode, read, write, clone, checksum and IMMO Off, idle speed adjustment, power upgrade (World’s first) 2. New checksum: Simos 8.x, MSD80, MSD81, MSD85, MSD87 Upcoming updates: 1. ME7.8, ME797, ME7971 virtual reading and writing, checksum, one-click operation mode for immo off, idle speed adjustment, power upgrade (World’s first) 2. ME797, ME7971 BSL read, write, clone and checksum 3. EDC16, EDC17, MED9 DTC clean and idle speed adjustment solution www.iecutool.eu