PCMtuner-tool

 Honda EDC17C58 read and write with pcmtuner Bench module 71 successfully. DPF OFF + EGR OFF (Flash + Eeprom backup) Pcmtuner pinout Honda EDC17C58

  Question: I try to write a modified file on pcmtuner module 71 and ask me to confirm the checksum. Normally it said in the module 71 can do flash checksum. But why is ask for continue if the checksum is not correct? Good file blue symbol and Yellow modified file. Solution: "Checksum is correct."= checksum was ok "Checksum was corrected." = the other wasnt so software corrected it. pcmtuner flash corrected the checksum and you can procceed. Press OK to correct checksum. One checksum was ok, the other wasnt so software corrected it. When software is modified always it needs to fix checksum. If you write the original no need to fix checksum!

 Q: I am looking for the pcmtuner pinout for a mev17.2.1 and I found it but there is a brown thread and I don't know what it corresponds to. A: lay it down in 29 and lay back in 11 Here is the pcm flash pinout MEV17.2.1 TC1796 the other sent from the pcmtuner app

  Fetrotech Tool EDC16C2 Mercedes pinout:- please also connect CANH + CANL pinouts for fetrotech are already available, this is fix

  Problem: Can I read Nissan March 2016 1.6 petrol engine ME 17.9.55 ecu with pcmtuner ? I tried module 71 but it is failing. Solution: pcmtuner ME17.9.55 ecu pinout use labels not colors. try GPT0 and GPT1 on pins marked yellow (any order may swap later), but please power everything off and restart PCM tuner and app before trying to make ID, if not ID then swap GTP wires and try again. If still failed, open ecu and check what TC17xx fitted, power on bottom row different and of course GPTs read password after ID to as this may not work like EDC17/MED17 automatic password.

 Q: Is it possible to read the VW MED17.1.27 control unit ecu with pcmtuner ? I made the connection but failed. Solution: Here is the MED17.1.27 pinout to pcmtuner module 71 If failed to read ecu, disconnect EVERYTHING, Repin ECU slowly and carefully making sure all pins are contacting, make sure the breakout cable is pushed properly into the pcm tuner device, restart computer, then add 12v power — and try again BUT first ID, do try and read, if not ID then no point.

 Windows 10 is recommended for fetrotech tool software installation. If you have Win7 laptop only, try the solution here. User working experience: 'I would like to share my experience of installation Fetrotech software on Windows 7 x64 unlimited. So, Fetrotech didn't want to start after installation. I have tried all tricks/recommendations but no result. Helps only activation of superadmin. How to Activate Super Administrator Account in Windows: https://techviral.net/activate-super-administrator-account-in-windows/ Before, I have noticed, when I go to properties of license files to unblock the file and apply the changes, everything looks Okay, but when you open it again, blocking still there… So, was not enough admin permission and file came back to block. After opening superadmin it stay unblocked. Good luck. If you install software on Win10, follow solutions here http://www.pcmtuner.org/fetrotech-tool-software-win10-pro-installation/ http://www.pcmtuner.org/fe