PCMtuner-tool

  Question: I can't do MED17.5 TC1766 1.5 mb file with foxflash by obd? any solution? Solution: Use bench or boot mode. Bench mode: BOSCH MED17.5 [ 1766 ] — VW, Audi, Seat, Skoda [Gasoline] To read and write use the following driver: → BENCH TRICORE → VW / AUDI / SEAT / SKODA → TC1766 — VAG → MED17.5 Boot mode: BOSCH MED17.5 [ TC1766 INT.F.] — VW, Audi, Seat, Skoda Step 1: Read and Write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1766 If the password error message appears at the beginning of the reading, proceed as follows: Step 2: Password search Disable the boot mode by unsoldering the grey wire. Connect the pinout below. Use the foxflash driver : → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD TPROT V08 VAG → Click on "Find Password" and follow the software messages. Now that the password has been found it's possi

  Problem: I have a problem with read ecu SID209 from ford transit 2015 i can read flash and password with foxflash by obd but i have an error when i try to write file by obd? Iecutool solution: First read obd password, after that remove ecu and read/write boot mode. 1. Send OBD read data and boot read (full read eeprom/ flash) data to iecutool.com engineer, foxflash team will help modify data, then OBD rewrite. 2. If boot read not working, try to write the OBD read file via OBD on bench mode (using godiag gt100 breakout box), then report the result. Check SID209 boot pinout here http://www.pcmtuner.org/can-foxflash-read-write-ford-sid209/

  Foxflash tool failed to read and write Dacia Duster SID306 ECU via OBD? voltage is 13V+. If fail to read SID306 by OBD, try boot mode. Foxflash SID306 boot pinout SIEMENS CONTINENTAL SID305/SID306 V.1 [ TC1766 INT.F.] — Renault, Nissan Read and Write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1766 Below we show 2 alternative methods of booting in the absence of the D48CB02 cable. Some hardware versions only boot in the following way: If OBD and boot all fail, the ECU is encrypted and it is not supported by foxflash. www.iecutool.com

 All foxflash users can display your company logo on foxflash website: https://www.dfb-technology.com/. Showcase Your Brand and Increase Your Visibility. Let more people know about your company through our website. How to Add Your Company Logo to Foxflash Website? Condition: 1 You are our device user 2 Send your company logo to our email or contact us online ( www.iecutool.com ) 3 Send us your website address 4 Send us your company name 5 Company profile of no less than 20 words Purpose: Display your tuning brand through our website, let more people know about you and bring more business. Here are examples:

 There is an 'interface customization' function button in new foxflash manager tool 1.3.6. What does it do? With this function users can customize your brand tuning logo into the tool software (order from www.iecutool.com via the plugin in foxFlash Manager button). The plugin will take $350 euro. Contact iecutool.com customer service if you need.

  Problem: I have a problem with Foxflash . It failed to read Bosch EDC16C31 volvo xc90 2007 model via OBD. Solution: Denso Volvo 2016 must unlock bench and write obd. No k-line at OBD in volvo. Bench it. Foxflash pinout to Volvo EDC16C31 BOSCH EDC16 C31 [ MPC561/2 ] — Volvo [Diesel] To read and write use the following driver: → BENCH MODE → Volvo → MPC561/2 — Volvo → EDC16 C31 BOSCH EDC16 C31 [ MPC563/4 ] — Volvo [Diesel] To read and write use the following driver: → BENCH MODE → VOLVO → MPC563/4 — Volvo → EDC16 C31 www.iecutool.com

  PCMTuner new feedback: Read and Write Renault Kangoo SID310 via OBD successfully. sid310 in a kangoo of 2017 1.5dci 110ch. Read ok via OBD, Writing ok via OBD. Use Module 59. Need charge battery 14v. Stage 1 ok. Images attached: