PCMtuner-tool

Where to find foxflash OTB adapter pinouts? Open the foxflash manager install folder there is a folder called 'Document'. The OTB pinout can be found in the document folder. PDF format in Help folder or check online version via browser. For example, search desired ECU in 'help' folder, i.e EDC16U1 You will see bench pinout With OTB adapter, only need to connect GND, VCC, CAN H and CAN L. Just check his CAN H, CAN L, VCC, GND then back to OBD driver connect with OTB. Don't need to connect GPT. If have Kline you also need connect Kline. Here is an example of reading and writing Mercedes CRD3.x using OTB adapter . http://www.pcmtuner.org/foxflash-read-and-write-mercedes-crd3-ecu-via-otb-adapter/

  Iecutool.com here shows an example of using the Foxflash and OTB adapter to read a Mercedes Crd3 ecu using obd driver. This is the CRD3.20 ECU What's needed: Foxflash OTB Adapter Power supply OBD Cable Mercedes Benz CRD3.20 pinout Identify needed OTB connection Prepare some cable connections Connect to foxflash OTB adapter Connect to ECU CRD3.20 Now connect OBD cable to OTB adapter and add 12v power Connect OBD cable to OTB adapter In foxflash car obd, select Mercedes then C calss, then CRD3.x We will use the fast canbus driver Get ID Read flash Select the file to write Write flash until finished.

  Foxflash user feedback: e2x0 mercedes 2017 ECU: Mrd1co001 bench all ok read ok write ok checksum by foxflash

  Foxflash user feedback: I'm very new to ecu work I have always been interested I have recently purchased a kess3 slave & now a FoxFlash. The fox flash is very easy to use especially with little experience. I've done a Fiat MJD8F. Read ok, Write ok, Checksum by fox. Don't connect bench box when read MJD 8F via full system. Check MJD8F pinout here http://www.pcmtuner.org/foxflash-failed-to-read-fiat-mjd-8f-on-bench-solution/

  Foxflash user feedback: Audi SQ7 2020 ECU MD1CP014 Mod+oil pressure+scr off Read ok bench Write ok bench Checksum by fox flash Foxflash pinout to Audi/Porsche MD1CP014 bench pinout To read and write use the following driver: → BENCH MODE → AUDI → TC298TP — VAG → MD1CP014 www.iecutool.com

  Foxflash new user feedback: I bricked a Ford Focus ESU131 with kess by obd, but foxflash jtag revived it. any JTAG would revive it without issues. Ford Focus 2.0 ESU131 Reading and writing with foxflash via Jtag. I did it recently. VISTEON ESU131, ESU132 — FORD, VOLVO Pinout to foxflash Connect multifunction cable as follows: Connect the color flat cable as in photo: To read and write use the following driver: → BDM/ JTAG MODE → BDM MPC → MPC55x/56x www.iecutool.com

  Question: Can I read/write/ PSA DCM 7.1A/DCM7.1B with foxflash via obd/boot? Does it correct checksum? Foxflash will read and write via boot mode only. Fix checksum int flash but may not fix checksum if you try to write full. If failed to correct checksum, do it manually. Read also: http://www.pcmtuner.org/foxflash-read-and-write-peugeot-traveller-dcm7-1a-in-boot/ http://www.pcmtuner.org/foxflash-read-and-write-citroen-jumper-dcm7-1b/ KESS3 will read DCM7.1A/DCM7.1B on bench. Visit www.iecutool.com if interested.

  Foxflash new user feedback: Volvo Truck TRW EMS2 E4 Read ok, Write ok, Checksum by foxflash tool In writing and reading always put the battery charge maintainer.

  Foxflash released new manager version 1.3.9 on Dec. 26th, 2023. Manager -VR file- Checksum fix -FW update December 26, 2023 We hereby declare that we have some Christmas update. FoxFlash 1.3.9 Update: OBD VR file update: MED17.5.25 DCM6.2A DCM6.2V DCM6.2C PCR2.1 SIMOS18.1 EDC17C74 foxFlash Manager Update: FW update to D086 Notifications add Checksum fix: Marelli 9DF Marelli MJD602.M1–603.S3 Bosch EDC17CP44 www.iecutool.com

  Foxflash new user feedback: Audi A4 2018 ECU EDC17C74 Adblue off with Davinci software Read/Write ok Checksum by fox Did it on bench. Obd works too But the owner send ecu from another City. Read 1:15 sec and Write 1:44 sec. www.iecutool.com

  Foxflash user feedback: VOLKSWAGEN GOLF 6 CONTINENTAL / SIMOS PCR2.1 FEEDBACK BENCH Get ID ok Read INT Flash Micro ok Read eeprom OK Read All OK Write INT FLASH MICRO, Failed 18% on first attempt then successful, 9 minutes. Checksum by foxflash. Check bench mode unlock pinout here http://www.pcmtuner.org/foxflash-pcr2-1-unlock-in-bench-mode/ http://www.pcmtuner.org/foxflash-unlock-vw-polo-2013-pcr2-1-on-bench/

  Foxflash user feedback: Delphi dcm 7.1a peugeot traveller Read ok Write ok, but not fix checksum Checksum correction manually. Read also: http://www.pcmtuner.org/foxflash-read-and-write-citroen-jumper-dcm7-1b/